Ford Transit Forum

one of the locks will be either faulty/worn or it's sticking/ jamming, get some loose juice in all ... the thing I don't get about this approach is that the locks lock and the integrated 'door ajar' switch also works. If the lock mechanism was faulty/worn/sticky/etc. then surely ...

well what a sh*t show… pulled the door card, cut the door ajar wire on the left side (already did the right side) and ... out of effs at this point. so I cut the next wire that was something to do with locking. killed central locking, but stopped the instant unlocking if any of the doors ...

one of the locks will be either faulty/worn or it's sticking/ jamming, get some loose juice in all ... the thing I don't get about this approach is that the locks lock and the integrated 'door ajar' switch also works. If the lock mechanism was faulty/worn/sticky/etc. then surely ...

... if it wakes something up Turn ignition on and off eight times and the locks will cycle all the best.mark used to be the bonnet security switch ... then activated checking each lock individually starting with drivers door..... simpler times am afraid Sent from my SM-G990B using Tapatalk

Don't know what you have in the way of a keyfob on 2012 Mine was doing it 2006 model... lock, then strait away, it unlocked on its own The cure was a new keyfob Still going strong now . bought in July.. .was cheap and cheerful .. i put a new battery with sell by date ...

Does anyone know how to fix the stupid lock problem? I’ve read the ‘ground the door sensor’ solution and even tried it although my door ajar lights are fine. All grounding it did was ...

second thoughts

as above, central locking brain has to know that the doors are locked or unlocked

so reattach every wire and just let it lock and unlock .. but your doors will be permanent bolted or welded shut


all the best.mark

... for the mk1 1.8 You must tell us all details .. year, engine size, otherwise you get a guessed answer or NO ANSWER 1.When you put the key into the lock, can you hear automation going on ..meaning you lock it .. it then unlocks automatically without you turning the key. 2, The central locking will ...

Hi, I took the back doors off my connect and I chopped the wires in both doors - not realising it was going to mess the whole central locking up. I don’t need the back doors off locks because they are now sealed shut. When I try and lock then van, it locks and then immediately unlocks. Is ...

Thank you for getting back to me. There is only a key lock on the drivers side and not passengers side but there is a black circle cover with no key hole. What is that for? It’s on all doors accept drivers door which has a key lock instead

You only have to have one lock malfunctioning and the rest will not work in central locking mode. They will try and immediately resume back to were they where..when the drivers door fails to register as unlocked . So you have to fix the drivers door lock or make it ...

... ago somebody broke into my van using a screwdriver on the drivers door and broke the lock. I cant lock the front doors using the fob or the key and I can’t open the back or side ...

Yes, all the locks lock cycle with the key when in the driver's side door lock but nothing when using the fob. If I do the ignition eight times stuff the van goes into programming ...

Does it still centrally lock with the key . meaning you turn the key in the door and you can hear all the locks open or close at the same ... clicking sounds ...as another fault can be ..passenger or rear door handle stiff ..and its not returned to resting position. ...

... Bernards) I have had 3 reoccurring problems 1. Rear Doors On a number of occasions - I have come out to the van in the morning and both rear door are slightly open - I use the side door for ... on dash (door open) and No alarm chirps when I locked the car. So has anyone else had their rear ...