by mcwayne » Thu Feb 15, 2018 10:20 pm
Im still in the process of diagnosing. The engines a non starter due to fuel not passing thro the pump. I put a scope on last week and eliminated most of the engine sensors, which tells me to some degree the ECU is working. Ive eliminated the Esos but ran out of time on the remaining pump valves, hope to check over the weekend. I 've narrowed things down to pump or ecu. I do have laser 200 but need a cable ywb 758. I would also like to get a epic cable connector and ecu 35 pin plug or a wiring harness complete i guess. I did get a Modis and laser 2000 connected but they both threw up data corrupt, which raised my suspicion on the ECU fault. Did strip down the ECK visibly everything looks fine so still searching for the answer.