Some new interesting pictures about Alcoa alloys - for dual wheels models. https://www.arconic.com/alcoawheels/cat ... hicles.pdf Images that was taken by user WildThing from USA Ford Transit Forum. He wrote: "Finally got the Duratrac tires on the 350 HD, I used LT225/75R16. These will not fit the rears on the stock rims but with the Alcoa wheels they fit perfectly. Lock to lock, no rub in the front and the backs fit with 1/2 inch clearance on the inside to the leaf spring, and the center gap is 1/8th of a inch at low pressure. It handles amazing, I am very happy that my measurements were correct!"
Riviera, model Vigor new photos on van Transit Custom Size 7.5Jx18" ET 45mm and 8.0x20" ET 50 mm, PCD 5 x 160 mm, load 950 kg, finishing: Black, Black Polished
Autec , model Type Q, size 6,5J x 16" ET 55/60 mm and 7,0J x 17" ET 54/55 mm, PCD 5 x 160 mm, CB 65,1 mm, load 1.150 kg, finishing: Brilliant silver oraz Black polished
MotionR, model VS1, size 8Jx18" and 8Jx20", PCD 5 x160 mm, ET 50 mm, CB 65.1 mm, 3x colours available: Hyper Silver, Satin Gunmetal and Satin Black, load rating: 800 kg per wheel.
Their spirit of design is similar to first Transit alloys - cult Ronal RS for Mk3 (7J x 14"). Very nice, old school project... One fault: it's really hard to keep clean.
RRW/JWL, model RR6-V, size 7.5J x 17", ET 30/50 mm, backspacing: 5.43" (+30 offset) / 6.22" (+50 offset), PCD 5 x 160 mm, load rating: 1.655kg/3650 lbs (heavy duty load rating) Compatible with TPMS Vehicle Fitment Ford Transit Manufactured...
Last edited by wojciech on Mon May 06, 2019 6:54 pm, edited 2 times in total.
RRW/JWL, model RR6-S, size 7.5J x 17", ET 30/50 mm, backspacing: 5.43" (+30 offset) / 6.22" (+50 offset), PCD 5 x 160 mm, load rating: 1.134kg/2.500lbs
Last edited by wojciech on Mon May 06, 2019 6:54 pm, edited 1 time in total.