Can anyone help with some info about MT75 gearbox and clutch

[sven]

Hello all

I have a new project going on,( which strictly isn't ford) where I am looking for a short gearbox I can modify to fit a rover V8 into a Suzuki SJ413

Can anyone confirm that the transits MT 75 gearbox have an 1" inputshaft with 23 splines?

and wasnt a 267mm clutch an option on some of the transits?

And at last I wonder if anyone knows the approximate length of a MT75 gearbox from front of bellhousing to propellershaft

if anyone can help me with this I will be extremely happy

regards

Sven Glosli

[MinorMatt]

Dieselhead123 does an adaptor plate to mate the rover v8 to a transit mt75 (not DOHC).

Spline size sounds right - but would need to checl

There is a large clutch (its 265mm iirc)

Would need to check the length

[sven]

Thank you MinorMatt.

Found the V8 in Transitthread now, and it gave me allmost all the information I needed:)

'I would really appreciate if you could check approximatly how long it is:) so I can see if the rover/transitcombo will fit:)

Thank you

[MinorMatt]

If no one else has... I will do some measurements next weekend on my loose box?