Alloys Wheel Adapters Transit to BMW Range Rover

[BONKERS24SEVEN]

I have had six sets of high quality aluminium wheel adapters manufactured for transit to 120mm PCD, this is a very popular stud spacing, BMW and Range Rover 16 17 18 19 and 20 inch alloys are easy come by very cheaply, I picked up a almost new set of Range Rover alloys without tyres for £50, I am keeping a set for myself and am selling the others at cost, £150 per set of 4, six was the minimum order for CNC machining, I'm not doing this for a profit. Get in touch if these are of interest, I can have them couriered by DHL for £11.50

[MrMPuk]

What year Transit were these made for?

[GAZ666]

hi there,
are these for the 5 or 6 stud fitting, would the company make them up for 6 stud at all?
cheers

[MrMPuk]

hi there,
are these for the 5 or 6 stud fitting, would the company make them up for 6 stud at all?
cheers

These will be for 5 stud, the trouble with the 6 stud axles is they are to wide already.

[BONKERS24SEVEN]

They are for five stud vans with a 160mm PCD

The company who made them will do any precision work but there would be a minimum order as they have to justify the setting up of the CNC machines


Any questions just give me a call on 01698 870762

[MrMPuk]

But what year transit were they made for?

[Luke]

I have pictures of them but can't work out how to include them

Any questions just give me a call on 01698 870762

email em me mate i'll post em up admin@fordtransit.org i'm always interested in this sort of stuff - £150's not a bad price for 4 but the way ive done it is use adapters for the back and redrill the front hubs

[Luke]

here's the pic

[w33ksy]

Hi mate im really interested in these ..
I dont carry weight but i was wondering if there was a speed rating for these ..
Are they safe for motorways u think?

Cheers, Chris

[Luke]

not sure they are for a mk6 - the mk6 uses a 14mm stud as opposed to 12mm for the earlier ones
aslo they dont have a centre boss

[MrMPuk]

not sure they are for a mk6 - the mk6 uses a 14mm stud as opposed to 12mm for the earlier ones
aslo they dont have a centre boss

That was why I was asking what year they were made for but the info wasn't forthcoming.

[BONKERS24SEVEN]

They are for Transits with 5 x 160mm PCD and 12mm studs, should fit Marks 1 to 4, the angle of the wheel nut has been replicated at the area where the transit studs go thru to perfectly centre the wheel, I've been told that you could use two adapters on the rear axle and have the front hubs drilled to suit.

[shirehorse]

i bought some of these and im stoked ,, cheeRS to bonkers24seven

[Luke]

nice one shirehorse that looks spot on just get them arches sorted now

[hdegroot]

nice one shirehorse that looks spot on just get them arches sorted now

http://s273.photobucket.com/albums/jj218/shirehorse123/

you know sea water caues rust?? what where you doing!