Ford transit sun visor

[mealic]

The visor isn`t sealed to the roof.The air passes over the front and also onto the windscreen and up and behind the visor a bit like a spoiler.It has tubular support bar horizontally from pillar bracket to bracket and fixed to face of visor.

[BigMonty]

The one for my van will need to act a a spoiler also.
I need downforce to keep the 2.5d on the ground

[robbie.cee]

The one for my van will need to act a a spoiler also.
I need downforce to keep the 2.5d on the ground

My front splitter does this can feel it Puk down when booting... Slows acceleratetion a bit tho

[robbie.cee]

Cheers Ali

[frank133]

Hi mealic,I do understand what you say ,this will be a reinforced visor,it will be open at the top to let the air pass through;
having a high top fibre glass roof,central supports are just going to flex the roof,
The ones I have seen for sale only bolt onto the inner door pillers,
with a steel tube from piller to piller at the front ,it should be fine.
If it flies of I will let you tell me I told you so

[mealic]

The central supports are fixed and integrated with the support bar and the visor which you rightly state are fixed to the pillars only.I never said that the visor was fitted direct to any height roof though.You can see what mine is like on the Kuda website

[hustler86]

how this comeing on mate ??

[robbie.cee]

Still not been to plastic supplier. Gotta go into town tomo so ill stop by ! sorry guys for delay

[hustler86]

Still not been to plastic supplier. Gotta go into town tomo so ill stop by ! sorry guys for delay

no worrys mate just like to see it when ur done

[robbie.cee]

ha what a bum i still aint been there, but back at work now and sort of getting bav=ck into the swing of things, slowly!

at least i got more access to plastic suppliers as im mobile and in kent daily again!

Hang in there guys, good things and all that!

[hustler86]

ha what a bum i still aint been there, but back at work now and sort of getting bav=ck into the swing of things, slowly!

at least i got more access to plastic suppliers as im mobile and in kent daily again!

Hang in there guys, good things and all that!

lol nice

[SNOWDOG]

Any progress on this one ?

[robbie.cee]

honestly, none so far m8 i keep forgetting bout this one as have had a list of things that needed addressing already!

will try to get something started before xmas!

[hotrod247]

just as a note on this , i had an idea on this the other day ime gona take a mold of the top of my smiley bonnet , narrow it down in the middle and play with the ends in sheet ally and see what the end result comes out like

[everardtransport]

count me in for a visor when you get chance of making some buddy