Mk7 Transit interior light / number plate sizes ???

[Geztransit]

Hi guys , was going to buy led replacements for all my interior lights , front and rear but can't seem to find the sizes of them? Was hoping someone would know , also rear number plate lights if possible!

Please don't think I'm lazy but my van is stored 15miles away from at the moment!

Many thanks for any info in advance!

[blue estate]

load area are 43mm festoon number plate and side light are 501 w5w don't bother with cab lights as they are not wired right for led

[blue estate]

I've just put 3 of theses in the load area of my jumbo and it's like a flood lit football pitch now
http://www.ebay.co.uk/itm/250867777655? ... 1497.l2649

[Geztransit]

Ok they look good, do they come on when doors are opened , or have to be manually switched on?

Also why won't cab lights works ? I was really looking forward to led cab light! (sad I know!)

Also just to confirm number plate lights are 501's - I.e same as sidelights?!

[Mike]

Ok they look good, do they come on when doors are opened , or have to be manually switched on?

Also why won't cab lights works ? I was really looking forward to led cab light! (sad I know!)

Also just to confirm number plate lights are 501's - I.e same as sidelights?!

The polarity is wrong for direct replacement cab lights.

Yes number plate and side light are the same but remember that they need to emit the light from the sides to work properly in the number plate position.

[blue estate]

Ok they look good, do they come on when doors are opened , or have to be manually switched on?

Also why won't cab lights works ? I was really looking forward to led cab light! (sad I know!)

Also just to confirm number plate lights are 501's - I.e same as sidelights?!

I have pluged them in to the factory loom spades for now so plug and play but i will be puting them on thier own curcit of the battery take off point so i can control when they are on and off

[Geztransit]

Ok they look good, do they come on when doors are opened , or have to be manually switched on?

Also why won't cab lights works ? I was really looking forward to led cab light! (sad I know!)

Also just to confirm number plate lights are 501's - I.e same as sidelights?!

The polarity is wrong for direct replacement cab lights.

Yes number plate and side light are the same but remember that they need to emit the light from the sides to work properly in the number plate position.

Can't I just turn the bulb round if polarity is wrong ?

[blue estate]

Ok they look good, do they come on when doors are opened , or have to be manually switched on?

Also why won't cab lights works ? I was really looking forward to led cab light! (sad I know!)

Also just to confirm number plate lights are 501's - I.e same as sidelights?!

The polarity is wrong for direct replacement cab lights.

Yes number plate and side light are the same but remember that they need to emit the light from the sides to work properly in the number plate position.

Can't I just turn the bulb round if polarity is wrong ?

only on the number plate one's the cab one's are bayonet fitting

[Mike]

Can't I just turn the bulb round if polarity is wrong ?

http://www.phoenixautobulbs.co.uk/pr/led-433-quad/

[Geztransit]

Can't I just turn the bulb round if polarity is wrong ?

http://www.phoenixautobulbs.co.uk/pr/led-433-quad/

Do these bulbs work for the transit ?!

[Mike]

No, as we said they're the wrong polarity.

[kevsterjw]

would it cause problems to swap the supply wires round for the cab light fitting?

[blue estate]

would it cause problems to swap the supply wires round for the cab light fitting?

Plugs are differant