Mk7 elec window conv issues!!!

[Benwidgery]

Hi everyone
Hopefully someone can help me with the above
Today I've fitted an electric window conversion to my 07 mk7 t330 Swb 2.4
All went well I have the correct loom I installed all the components Reyes it nothing happens
There is a good fuse in the right place for power windows but they don't seem to work
I noticed whilst fitting that I also have the plugs for power mirrors in the loom
I was wondering if there is another fuse or relay that might be missing before it gets to blue fuse no 56?
Any help would be greatly appreciated

[loot]

F62 + f56 and relay r19 (most likely present tho) also make sure that the switches work, they take illumination power from the same supply so if they light up when you put the key to position 2 then the problem isn't power from fusebox related.

[Benwidgery]

Thanks I will check that out in the morning

[Benwidgery]

Well I've been and checked the fuse box fuse 62 is there and in good shape
However relay r19 isn't so this may be the issue although I did try borrowing a relay from r22 to see if that made them work no joy but I guess that may need to be there aswell I'll go to ford tomorrow and get relay r19 and put it on and see if they come to life

[loot]

Ok make sure you can see 4 spades behind the plastic where the relay r19 legs go

[Benwidgery]

Thanks yes there are spades in the box
I also noticed r24 is missing

[Bri280i]

Hi there wondering if anyone can help. I've fitted a genuine window kit. Looms switches ect to my my 7 but there is nothing in f54 or was it 56? No spades to connect a fuse to

Can anyone help with what I need to do?

Thanks in advance. Bri.