Mk1 focus ecu pinout needed

[D2016]

Bit of a long shot, Im in need of a pinout diagram for a 2.0 mk1 focus, does anyone have one?

[paul2012]

I have wring diagrams.

What PCM pin outs do you require

[D2016]

Pins: 10, 13, 16, 22, 28, 40 ,47, 53, 54, 57, 60

The loom was cut at the pcm, it's mostly the grounds/earths I can't get my head around. I'm left with bl/yl, bk/bu, bk/ye and gn/ye wires

Pic of the ecu if it helps.

[knobby1]

Pins: 10, 13, 16, 22, 28, 40 ,47, 53, 54, 57, 60

The loom was cut at the pcm, it's mostly the grounds/earths I can't get my head around. I'm left with bl/yl, bk/bu, bk/ye and gn/ye wires

Pic of the ecu if it helps.

There's the problem right there..it's upside-down..!

Lord Knobrot

[MinorMatt]

Thats because your down under!!

We all turn our photos upside down for the benefit of those who are the wrong side if the equator, but occasionally one slips though...

[D2016]

I've made a bit of progress, now only left with pins: 16, 40, ,60 (bk/ye) which are all grounds and 37, 57 which I think are engine control relay (gn/ye).

The problem now is I'm getting continuity from either pin 37 or 57 on the vss (pin 3), idle control plug (pin 1) and plug c80 (pin 9)
Also getting continuity from all three pins 16, 40 and 60 on both power steering (pin 2) and vss (pin 1)

Does this mean the grounds can be connected in any sequence? Same with the engine control wires?

[knobby1]

Thats because your down under!!

We all turn our photos upside down for the benefit of those who are the wrong side if the equator, but occasionally one slips though...

LOL... Smart ar$e..

Lord Knobrot

[D2016]

All sorted now