*NOW BOOKED FOR 2024* Transitmania 15 @ Santa Pod 19th to 21st July 2024 *ALL DETAILS HERE*


Mk7 running rough juddering

Use this forum to post technical questions & problems about any Transit

Moderator: Luke

Re: Mk7 running rough juddering

Postby Spicerronnie1989 » Thu Jul 28, 2016 10:29 pm

andz327 wrote:It gives you problems, each injector is basically set by computer on that particular cylinder, also the last fault sounds like the flywheel sensor not far enough in that it wont start on its own

But would it run at all if it was fly well just put it back together still will not start by its self could it just need a run round the block coz I cleaned every think
Spicerronnie1989
Transit Addict
Transit Addict
 
Posts: 84
Joined: Wed Jun 15, 2016 9:23 pm

Re: Mk7 running rough juddering

Postby andz327 » Thu Jul 28, 2016 11:04 pm

You have it running?
User avatar
andz327
Transit Extremist
Transit Extremist
 
Posts: 5646
Joined: Thu Jan 14, 2016 3:44 am

Re: Mk7 running rough juddering

Postby Spicerronnie1989 » Fri Jul 29, 2016 9:13 am

andz327 wrote:You have it running?

It well run yes but won't start by its self are they any good
You do not have the required permissions to view the files attached to this post.
Spicerronnie1989
Transit Addict
Transit Addict
 
Posts: 84
Joined: Wed Jun 15, 2016 9:23 pm

Re: Mk7 running rough juddering

Postby andz327 » Fri Jul 29, 2016 11:44 am

Can't you get it to vantuner to be put on his computer
User avatar
andz327
Transit Extremist
Transit Extremist
 
Posts: 5646
Joined: Thu Jan 14, 2016 3:44 am

Re: Mk7 running rough juddering

Postby Spicerronnie1989 » Fri Jul 29, 2016 1:03 pm

andz327 wrote:Can't you get it to vantuner to be put on his computer

Not at the moment as just put on what I need to start it plus vantuner all ways Busy
Spicerronnie1989
Transit Addict
Transit Addict
 
Posts: 84
Joined: Wed Jun 15, 2016 9:23 pm

Re: Mk7 running rough juddering

Postby Spicerronnie1989 » Sun Jul 31, 2016 11:07 am

Is there not any one by me that can fix it
Spicerronnie1989
Transit Addict
Transit Addict
 
Posts: 84
Joined: Wed Jun 15, 2016 9:23 pm

Re: Mk7 running rough juddering

Postby karl » Sun Jul 31, 2016 12:11 pm

sounds to be you have low compression

if it doesn't start on it own

is it like it miss fires, is their oil coming out of the filler neck ?
User avatar
karl
Tranny Lover!!!
 
Posts: 8964
Joined: Tue Jan 08, 2013 9:03 pm
Location: manchester

Re: Mk7 running rough juddering

Postby Spicerronnie1989 » Sun Jul 31, 2016 3:13 pm

No miss fire do you think it just needs a drive
Spicerronnie1989
Transit Addict
Transit Addict
 
Posts: 84
Joined: Wed Jun 15, 2016 9:23 pm

Re: Mk7 running rough juddering

Postby andz327 » Thu Aug 04, 2016 7:26 pm

Spicerronnie1989 wrote:No miss fire do you think it just needs a drive

Does it rev up ok
User avatar
andz327
Transit Extremist
Transit Extremist
 
Posts: 5646
Joined: Thu Jan 14, 2016 3:44 am

Re: Mk7 running rough juddering

Postby Spicerronnie1989 » Sun Aug 07, 2016 9:00 pm

Good news and bad start with the good it was crack shaft sensor so now running very well but now for the bad it was makes a squeal when raving up then stop was seized solid but now ok I thinking the. Squill was turbo lack of oil because put a new pump on but it was cheep so I don't now if it's man enuff what people view on this plz
Spicerronnie1989
Transit Addict
Transit Addict
 
Posts: 84
Joined: Wed Jun 15, 2016 9:23 pm

Re: Mk7 running rough juddering

Postby knobby1 » Mon Aug 08, 2016 9:22 pm

Spicerronnie1989 wrote:Good news and bad start with the good it was crack shaft sensor so now running very well but now for the bad it was makes a squeal when raving up then stop was seized solid but now ok I thinking the. Squill was turbo lack of oil because put a new pump on but it was cheep so I don't now if it's man enuff what people view on this plz


Speak English..??? Can't understand a word... "Crack shaft"....."Squill"???...."raving up"?? ...WTF?

Not trying to be too much of a grammar/spelling nazi but geezus....Do you actually read what you've written?

Lord Knobrot
2008 2.4L RWD 170+PS 6-speed 350 LWB High Roof.

When I die, I want to go peacefully in my sleep like my Grandfather, not screaming like the passengers in his car..!
User avatar
knobby1
Transit Extremist
Transit Extremist
 
Posts: 15840
Joined: Tue Oct 21, 2014 1:36 am
Location: Brisbane, Australia

Re: Mk7 running rough juddering

Postby Punto443 » Mon Aug 08, 2016 9:39 pm

Funking spel natzi :lol:
Your bullets cannot harm me, my wings are like a shield of steel

2018 Renault trafic
my old mk7
my old mk6
my xr3i
User avatar
Punto443
Site Moderator
 
Posts: 15872
Joined: Mon Jan 23, 2012 4:53 pm
Location: Deep fried pizza country

Re: Mk7 running rough juddering

Postby knobby1 » Mon Aug 08, 2016 9:48 pm

Punto443 wrote:Funking spel natzi :lol:


LOL...! :lol:

I really try not to be :? ....but sometimes it's very difficult to understand what some are trying to say...I can understand if their first language isn't English though....

I don't speak another language but admire those who can.

Lord Knobrot
2008 2.4L RWD 170+PS 6-speed 350 LWB High Roof.

When I die, I want to go peacefully in my sleep like my Grandfather, not screaming like the passengers in his car..!
User avatar
knobby1
Transit Extremist
Transit Extremist
 
Posts: 15840
Joined: Tue Oct 21, 2014 1:36 am
Location: Brisbane, Australia

Re: Mk7 running rough juddering

Postby andz327 » Mon Aug 08, 2016 11:42 pm

knobby1 wrote:
Punto443 wrote:Funking spel natzi


LOL...!

I really try not to be :? ....but sometimes it's very difficult to understand what some are trying to say...I can understand if their first language isn't English though....

I don't speak another language but admire those who can.

Lord Knobrot

His English isn't good, he's had a bad enough time as it is on here without being slated for his spelling guys
User avatar
andz327
Transit Extremist
Transit Extremist
 
Posts: 5646
Joined: Thu Jan 14, 2016 3:44 am

Re: Mk7 running rough juddering

Postby andz327 » Mon Aug 08, 2016 11:50 pm

Spicerronnie1989 wrote:Good news and bad start with the good it was crack shaft sensor so now running very well but now for the bad it was makes a squeal when raving up then stop was seized solid but now ok I thinking the. Squill was turbo lack of oil because put a new pump on but it was cheep so I don't now if it's man enuff what people view on this plz

That's good it's running now Ronnie, Was it to big a gap at sensor or did it need replacing altogether
User avatar
andz327
Transit Extremist
Transit Extremist
 
Posts: 5646
Joined: Thu Jan 14, 2016 3:44 am

PreviousNext

Return to Technical Problems & Questions



Who is online

Users browsing this forum: No registered users

This site contains affiliate links for which we may be compensated.