Wishbone bush replacement

[jacky]

Needing to get wishbone bush done in my van. It was an advisory on the last mot but it now needs done pronto. I can get it out the wishbone no probs but wondering how hard they are to press back in.

2010 Transit 280 swb

[andz327]

Do you have a decent vice

Sent from my D6603 using Tapatalk

[ABA]

a long bolt 2 big washers and 2 large nuts

[jacky]

Only have a vice thats equivalent to a toy how would i do the bolt method ?

Ive got a brake caliper rewind tool if that would do

[jolly olly]

Get your long bolt then put washer then bush feed bolt through hole in wishbone washer on then nut lign it up and then tighten it up to pull bush into place.

[ned]

Get your long bolt then put washer then bush feed bolt through hole in wishbone washer on then nut lign it up and then tighten it up to pull bush into place.

Don't you also need a socket that is bigger then the bush? So it gives the nut something to push against so it pulls the bush in also something to lubricate the outer part of the bush to help it slide in ( saw it done like that on wheeler dealers ) N

[jacky]

cool will give it a go

ta