*NOW BOOKED FOR 2024* Transitmania 15 @ Santa Pod 19th to 21st July 2024 *ALL DETAILS HERE*


Help needed with mk6 speedo please

Use this forum to post technical questions & problems about any Transit

Moderator: Luke

Help needed with mk6 speedo please

Postby craig766 » Sat Jun 24, 2017 8:00 pm

Hi guys
Am after some help with a 2005 2.0di mk6 transit. No speedo EVERYTHING ELSE ON CLUSTER WORKS FINE. No codes stored. VSS is working and is sending signal to ecu, can bus signal seems to be ok (mirror image on scope). However although i seem to be getting a signal from VSS to ecu it still reads 0mph on the scanner? Could this be a fault within the ecu? Im assuming the signal from ecu is sent via can bus to cluster? Andone had symptoms like this? Any ideas where to go next? Thanks guys
craig766
Transit Fan
Transit Fan
 
Posts: 17
Joined: Fri Dec 11, 2015 10:10 pm

Re: Help needed with mk6 speedo please

Postby Mr RVM » Tue Jun 27, 2017 1:11 am

Common problem with Mk6's.....I've had it twice.....replacing the cluster cured it both times.....
Mr RVM
Transit Fanatic
Transit Fanatic
 
Posts: 4272
Joined: Fri Mar 02, 2012 2:21 am
Location: Co Durham

Re: Help needed with mk6 speedo please

Postby dumper » Tue Jun 27, 2017 7:53 am

Dry joints on printed circuit is common fault
MK 8 L4 H3 Motorsport campervan
Past camper vans
1974 mk1 v4 with 2.0 pinto fitted
1986 mk3 2.5 di swb
1990 190 lwb 2.5 di
1998 100 lwb 2.5 di
2006 350 jumbo 135 tdci
dumper
Transit Extremist
Transit Extremist
 
Posts: 5438
Joined: Sun Jan 20, 2008 2:56 pm
Location: Lincolnshire

Re: Help needed with mk6 speedo please

Postby craig766 » Wed Aug 02, 2017 7:49 pm

Thanks for reply turned put to be the ecu. Thanks again
craig766
Transit Fan
Transit Fan
 
Posts: 17
Joined: Fri Dec 11, 2015 10:10 pm


Return to Technical Problems & Questions



Who is online

Users browsing this forum: No registered users

This site contains affiliate links for which we may be compensated.