*NOW BOOKED FOR 2024* Transitmania 15 @ Santa Pod 19th to 21st July 2024 *ALL DETAILS HERE*


indicators not working on LHS

Use this forum to post technical questions & problems about any Transit

Moderator: Luke

indicators not working on LHS

Postby Nick.S » Wed Jun 28, 2017 11:48 am

Hi Guys,
I have a 2012 transit crew cab tipper which was running sweet as until I towed a trailer at the weekend. Within few miles the LHS stopped working. When I uncoupled the trailer I noticed the towing dolly was full of water!
Since then, NONE of the LHS indicators will light up or flash or illuminate the little green arrow on the dash when asked for by means of the stalk, hazard switch, or the alarm fob .
ALL bulbs, holders, fuses, relays have been checked by myself and 3 other spanner lads.
The RHS side is working fine.
Any suggestions ?
Nick.S
Newbie
 
Posts: 1
Joined: Wed Jun 28, 2017 11:22 am

Re: indicators not working on LHS

Postby ake » Sun Jul 02, 2017 5:35 pm

Needs plugged in diagnostics, the bcm may have shut down the output due to the fault on the trailer
Ford Transit Custom 280S Trend 105ps
Does this train stop on Merseyside?
ake
Site Moderator
 
Posts: 41833
Joined: Wed Aug 06, 2008 8:19 pm
Location: The fair city o' Perth


Return to Technical Problems & Questions



Who is online

Users browsing this forum: No registered users

This site contains affiliate links for which we may be compensated.