Moderator: Luke
Jim Archer wrote:When you checked the timing, you used 3 correct sized pins?
Jim
ake wrote:Start it up, let it run for a few minutes, then stall it in fifth gear, whilst turning the key off just after.
Restart it, if the light stays out, and it runs ok, you need a new stop solenoid.
If there is any doubt about the timing belt, change it. They don’t need much stretch to put the light on
BL Convoy wrote:When you come to stop the engine and turn the key back to the "off" position the engine keeps running,
MinorMatt wrote:I can probably get to you to read codes... but you definately have an ESOS problem which will put you in to limp mode...
MinorMatt wrote:I can supply if you have no luck (or can't be bothered ro look) elsewhere...
Return to Technical Problems & Questions
Users browsing this forum: Google [Bot]
This site contains affiliate links for which we may be compensated.