by tjm07 » Sat Dec 23, 2017 10:15 am
After my backward conversion to a mk3 mondeo engine in my mk7 transit, I keep getting p0235 code any time I try and drive with a bit of urgency!! Seems ok until it’s up to about 2.5-3k then flashy glow plug light and limp mode. I am not using to van as a daily driver it is just sitting around at the moment, been to the mot station and back and around the block a few times.Have plugged it in to forscan, and I believe it’s telling me my map sensor is u/s. just wanted to be sure there’s nothing I am missing. Checked voltage at plug pin 1-1.5v pin 2 5v pin 4 to earth, which checks out ok. On live monitoring on forscan map.obdII,kpa stays at 250 regardless of revs. Please see images. Thanks in advance
You do not have the required permissions to view the files attached to this post.
2008 Mk7 Swb transit crew bus 85ps
2002 BMW 320d e46 204k and counting SCRAPPED
2005 Vauxhall astra sri SOLD
2005 BMW 320i m sport
2006 Vauxhall Astra 1.4 affectionately nicknamed s#*tbox