*NOW BOOKED FOR 2024* Transitmania 15 @ Santa Pod 19th to 21st July 2024 *ALL DETAILS HERE*


125hp TDDI head

Use this forum to post technical questions & problems about any Transit

Moderator: Luke

125hp TDDI head

Postby headbolt » Sun Jan 07, 2018 10:08 pm

does anyone know if the heads on the 125hp TDDI engine are any different form other models thanks as I am in need of a new head for 125hp and just want to be sure before I buy one thanks
MK6 125 BHP 330 rwd 2.4
User avatar
headbolt
Transit Addict
Transit Addict
 
Posts: 49
Joined: Thu Jan 24, 2013 6:58 pm
Location: Rotherham South Yorkshire

Re: 125hp TDDI head

Postby andz327 » Sun Jan 07, 2018 10:12 pm

Is there such a beast ????
User avatar
andz327
Transit Extremist
Transit Extremist
 
Posts: 5565
Joined: Thu Jan 14, 2016 3:44 am

Re: 125hp TDDI head

Postby Punto443 » Sun Jan 07, 2018 10:44 pm

Rwd 125 is a tddi.

I think only the tdci head differs and all tddi heads are the same if the same engine capacity.
But Karl will know.
Your bullets cannot harm me, my wings are like a shield of steel

2018 Renault trafic
my old mk7
my old mk6
my xr3i
User avatar
Punto443
Site Moderator
 
Posts: 15872
Joined: Mon Jan 23, 2012 4:53 pm
Location: Deep fried pizza country

Re: 125hp TDDI head

Postby bambi mk 1 » Sun Jan 07, 2018 10:45 pm

Any rwd 2.4 tddi head will fit ,but check if glow plugs are out if buying used as you will most likely need them with a 125 :)
On the sixth day God created a Sprinter on the seventh he gave it away and bought a TRANSIT
User avatar
bambi mk 1
Transit Extremist
Transit Extremist
 
Posts: 8826
Joined: Sat Nov 17, 2012 10:05 pm
Location: 24 Years living next door to Alice

Re: 125hp TDDI head

Postby knobby1 » Sun Jan 07, 2018 10:49 pm

bambi mk 1 wrote:Any rwd 2.4 tddi head will fit ,but check if glow plugs are out if buying used as you will most likely need them with a 125 :)


If they're out...just buy a new set of plugs...too easy..!

Lord Knobrot
2008 2.4L RWD 170+PS 6-speed 350 LWB High Roof.

When I die, I want to go peacefully in my sleep like my Grandfather, not screaming like the passengers in his car..!
User avatar
knobby1
Transit Extremist
Transit Extremist
 
Posts: 15738
Joined: Tue Oct 21, 2014 1:36 am
Location: Brisbane, Australia

Re: 125hp TDDI head

Postby bambi mk 1 » Sun Jan 07, 2018 11:04 pm

knobby1 wrote:
bambi mk 1 wrote:Any rwd 2.4 tddi head will fit ,but check if glow plugs are out if buying used as you will most likely need them with a 125 :)


If they're out...just buy a new set of plugs...too easy..!

Lord Knobrot

And if they are not get the seller to remove them :wink:
On the sixth day God created a Sprinter on the seventh he gave it away and bought a TRANSIT
User avatar
bambi mk 1
Transit Extremist
Transit Extremist
 
Posts: 8826
Joined: Sat Nov 17, 2012 10:05 pm
Location: 24 Years living next door to Alice

Re: 125hp TDDI head

Postby headbolt » Sun Jan 07, 2018 11:16 pm

thanks guys good to know and yes definetly getting new glow plugs before fitting on van
MK6 125 BHP 330 rwd 2.4
User avatar
headbolt
Transit Addict
Transit Addict
 
Posts: 49
Joined: Thu Jan 24, 2013 6:58 pm
Location: Rotherham South Yorkshire

Re: 125hp TDDI head

Postby andz327 » Mon Jan 08, 2018 1:21 am

bambi mk 1 wrote:
knobby1 wrote:
bambi mk 1 wrote:Any rwd 2.4 tddi head will fit ,but check if glow plugs are out if buying used as you will most likely need them with a 125 :)


If they're out...just buy a new set of plugs...too easy..!

Lord Knobrot

And if they are not get the seller to remove them :wink:
Easy to get them oot with it off, plenty room to drill, tap , screw in mini slide puller and pop she goes
User avatar
andz327
Transit Extremist
Transit Extremist
 
Posts: 5565
Joined: Thu Jan 14, 2016 3:44 am

Re: 125hp TDDI head

Postby wojciech » Wed Jan 10, 2018 4:07 pm

If you need buy used cylinder head, a biggest problem are not glow plugs, but the fact that cylinder head make always two unchangeable parts: lower main cylinder head and upper light frame, mounting camshafts in the cylibder head. This two part hasn' two different numbers, they have one common number. Wholes for camshafts are machine in factory in two joined parts - and from this moment they constitute one unchangeable part with one number.
So - if we take and mount this two elements from two different engines - we have only very little chance for good and long engine work. Sometimes halfs of whole for camshafte are displaced one to second nearly half milimeter. It can not work correctly. Sometimes it is no bad...
You should buy this two things together from one engine.

On the picture nr 1 - violet single triangle.
You do not have the required permissions to view the files attached to this post.
User avatar
wojciech
Transit Fanatic
Transit Fanatic
 
Posts: 2116
Joined: Mon Aug 02, 2010 12:40 pm
Location: long way away

Re: 125hp TDDI head

Postby karl » Wed Jan 10, 2018 7:02 pm

told you you would need a full head i have a complete secound hand one with cams £250.00 :D
User avatar
karl
Tranny Lover!!!
 
Posts: 8964
Joined: Tue Jan 08, 2013 9:03 pm
Location: manchester

Re: 125hp TDDI head

Postby karl » Sat Jun 09, 2018 9:28 pm

I have sent you a pm mate

and yes it still available :D
User avatar
karl
Tranny Lover!!!
 
Posts: 8964
Joined: Tue Jan 08, 2013 9:03 pm
Location: manchester


Return to Technical Problems & Questions



Who is online

Users browsing this forum: No registered users

This site contains affiliate links for which we may be compensated.