ABS wires ??

[Pete.s]

2005 t280 swb, found these wires broke / cut today, look like ABS wires going into the back plates of my rear brake drums, the wires are cut just above the flexi hose to metal brake pipe connectors on the beam axle, question is why do i not have any warning lights on the dash?, and will my abs brakes still work?

Pete......

[andz327]

[quote="Pete.s"]2005 t280 swb, found these wires broke / cut today, look like ABS wires going into the back plates of my rear brake drums, the wires are cut just above the flexi hose to metal brake pipe connectors on the beam axle, question is why do i not have any warning lights on the dash?, and will my abs brakes still work?

Pete......

Is your abs working ?

[Punto443]

Do you have abs?

[Pete.s]

2005 t280 swb, found these wires broke / cut today, look like ABS wires going into the back plates of my rear brake drums, the wires are cut just above the flexi hose to metal brake pipe connectors on the beam axle, question is why do i not have any warning lights on the dash?, and will my abs brakes still work?

Pete......

Is your abs working ?

Not sure?, brakes appear to work ok, only had the van 2 weeks,

[Pete.s]

Do you have abs?

I'm guessing I have, if I dont why is ther ABS wires?, well I'm assuming they are ABS wires, will look under the bonnet tomorrow

[andz327]

2005 t280 swb, found these wires broke / cut today, look like ABS wires going into the back plates of my rear brake drums, the wires are cut just above the flexi hose to metal brake pipe connectors on the beam axle, question is why do i not have any warning lights on the dash?, and will my abs brakes still work?

Pete......

Is your abs working ?

Do you have abs?

Was wondering that maself mate was it not standard on them in 2005, a know ma 55 plate had but it was a higher spec job

[ned]

2005 t280 swb, found these wires broke / cut today, look like ABS wires going into the back plates of my rear brake drums, the wires are cut just above the flexi hose to metal brake pipe connectors on the beam axle, question is why do i not have any warning lights on the dash?, and will my abs brakes still work?

Pete......

Is your abs working ?

Do you have abs?

Was wondering that maself mate was it not standard on them in 2005, a know ma 55 plate had but it was a higher spec job

I have abs doesn't bloody work I need to change the front n/s sensor, as for warning lights well there are ways to turn them out N

[andz327]

[quote="Punto443 wrote:Do you have abs?

Was wondering that maself mate was it not standard on them in 2005, a know ma 55 plate had but it was a higher spec job

I have abs doesn't bloody work I need to change the front n/s sensor, as for warning lights well there are ways to turn them out N[/quote]Now no bad habits please mr Ned

[andz327]

[quote="Punto443 wrote:Do you have abs?

Was wondering that maself mate was it not standard on them in 2005, a know ma 55 plate had but it was a higher spec job

I have abs doesn't bloody work I need to change the front n/s sensor, as for warning lights well there are ways to turn them out N[/quote]Now no bad habits please mr Ned[/quote]Mr Ned sort mine

[Pete.s]

the wires look like they were cut on purpose, but why do that?, an surely it would be an MOT fail with cut abs wires would it not

[ned]

I have abs doesn't bloody work I need to change the front n/s sensor, as for warning lights well there are ways to turn them out N

Now no bad habits please mr Ned

Mr Ned sort mine

Pull the fuse if that don't work unsolder the led N

[ned]

the wires look like they were cut on purpose, but why do that?, an surely it would be an MOT fail with cut abs wires would it not

People are lazy, instead of fixing the fault they cut the wires I thank as for mot if there's no warning lights its not a fail as long as the brakes meet the braking requirements. N

[Pete.s]

the wires look like they were cut on purpose, but why do that?, an surely it would be an MOT fail with cut abs wires would it not

People are lazy, instead of fixing the fault they cut the wires I thank as for mot if there's no warning lights its not a fail as long as the brakes meet the braking requirements. N

Ah right that would make sense with some people, i thought MOT man would fail the cut wires though