*NOW BOOKED FOR 2024* Transitmania 15 @ Santa Pod 19th to 21st July 2024 *ALL DETAILS HERE*


radiator for a 2.9 efi

Use this forum to post technical questions & problems about any Transit

Moderator: Luke

radiator for a 2.9 efi

Postby hotpaint » Fri May 04, 2018 12:49 pm

Hi I am fitting a 2.9 efi in to a mk3 pinto 2.0 van
The pinto radiator outlets are not good for this conversion
I cant find a radiator listed anywhere for the 2.9 efi van
These were svo ambulances police vehicles so there must have been a radiator for them.
the Granada one i have is too tall for the mk3 body
does anyone know what radiator fits this setup?
thanks
hotpaint
Transit Fan
Transit Fan
 
Posts: 11
Joined: Sat May 24, 2014 9:32 am

Re: radiator for a 2.9 efi

Postby hotpaint » Sun Aug 05, 2018 6:42 pm

in the end I used a subaru radiator as teh oputlets were in the right place one and it works fine
off with teh viscous coupled fan and cut off teh threaded boss as its too close to the rad

twin fan set up off a peugeot/citroen (had it lying around) with a thermostatic controller and overrride switch
hotpaint
Transit Fan
Transit Fan
 
Posts: 11
Joined: Sat May 24, 2014 9:32 am


Return to Technical Problems & Questions



Who is online

Users browsing this forum: Google [Bot]

This site contains affiliate links for which we may be compensated.