hi people i been getting cutting out on starting,but after 5-7 go`s it runs sometimes makes a rattle noise cuts out,but it will start and drive power seems fine
etc,i put a post up last night was advised to do timing chain etc.
but today i found an old vgate maxiscan vs-890 thought id hook it up,even tho no dash lights on etc,and it gave me a code p0001
it says on more info on the scanner fuel volume regulator control-open circuit ,also wiring regulator control solenoid
i know the scanner is an old cheap thing but should i not have had engine light come on,if it had stored a code.
or can they stay out even tho something is wrong.
ive looked online and the solenoid i think this is referring to is on the pump,if so is it straight forward fitting
i did fit both solenoids on an old 02 transit duratorq years ago,i think it was fuel metering and fuel timing i changed,was a bit of a pig,but it was at the front,but it ran fine after and still dose.is the 07 2.4 easy and straightforward if this is my problem.many thanks.