mk4 LWB Project! UP DATE! one side nerly done in blue !!!

[intransit89]

sounds like either the engine to bell-housing locating lugs are seized in solid or the gearbox input shaft is seized in the spigot bearing on the end of the crank

Theres not much else it can be in my experience.

How much gap have you managed to get between the engine block and bell housing?

10mm roughly is the gap

[transit killer]

It might be worth hooking the clutch cable back up and press the clutch pedal to separate the box from the engine.
Make sure the box is well supported though before trying this cos it may suddenly split !

[intransit89]

It might be worth hooking the clutch cable back up and press the clutch pedal to separate the box from the engine.
Make sure the box is well supported though before trying this cos it may suddenly split !

never throught about that mate

will give it a try tomorow gona get a bigger jack to

[captain hook]

WTF

Is this not the thread about your van

Talk about thread hi-jacking and irrelevant posts

Take it to a Fiat garage

That's the way forward

[transit killer]

Yes captain hook knows his onions, might as well tell Dave to take his transit to a Fiat garage to get the clutch done cos that makes sense.
What is irrelevant about asking for advice on removing a transit gearbox or are highcubes not transit related LOL, and that aside this is Robs thread isnt it?

I think you will find "hooker" that is your post which is irrelevant.

[MR BigBeefy LDV Guru]

hey rob hows the bedford rascal coming on have you finished welding it yet

[intransit89]

hey rob hows the bedford rascal coming on have you finished welding it yet

nerly one side to finsh now

[intransit89]

up date not much realy but the bedford rascal passed its mot now due to new archs / sills i welded on for a old bloke on my street and i got payed he even come down the next day with a extra 20.00 as hes so pleased with it so that was all together 140.00

anyway my provsional has just come so time to sort some driving lessions out

got about 100 spare
and a up date on my van is starting to cut of that panel from me new back arch to the sliding door of and got a 12v light for the back of my van wired of the back light wire thats there in the roof one

[intransit89]

oh and forgot to say i got a pair of car ramps for 4.00 and a draper foldable axel stand for 3.00 brand new

[AlanN]

anyway my provsional has just come so time to sort some driving lessions out

Oh no! I never thought about that bit, I dont feel well ...

...Mablethorpe, I feel a little better now

[Gurj51ngh]

anyway my provsional has just come so time to sort some driving lessions out

Oh no! I never thought about that bit, I dont feel well ...

...Mablethorpe, I feel a little better now

i doubt he will get any where near your front spliter with his van lol.

[AlanN]

anyway my provsional has just come so time to sort some driving lessions out

Oh no! I never thought about that bit, I dont feel well ...

...Mablethorpe, I feel a little better now

i doubt he will get any where near your front spliter with his van lol.

[intransit89]

up date done some undersealing useing that spray on stuff

and gray primerd the side as its done to that bit





still got to do the rear crossmeber to weld up but the new jack will help better

[intransit89]

WEIGH IT IN WEIGH IT IN WEIGH IT IN WEIGH IT IN WEIGH IT IN WEIGH IT IN WEIGH IT IN WEIGH IT IN WEIGH IT IN WEIGH IT IN WEIGH IT IN WEIGH IT IN WEIGH IT IN WEIGH IT IN WEIGH IT IN WEIGH IT IN WEIGH IT IN WEIGH IT IN WEIGH IT IN WEIGH IT IN WEIGH IT IN WEIGH IT IN WEIGH IT IN WEIGH IT IN WEIGH IT IN WEIGH IT IN WEIGH IT IN WEIGH IT IN WEIGH IT IN WEIGH IT IN WEIGH IT IN WEIGH IT IN WEIGH IT IN WEIGH IT IN WEIGH IT IN

[MrMPuk]

WEIGH IT IN WEIGH IT IN WEIGH IT IN WEIGH IT IN WEIGH IT IN WEIGH IT IN WEIGH IT IN WEIGH IT IN WEIGH IT IN WEIGH IT IN WEIGH IT IN WEIGH IT IN WEIGH IT IN WEIGH IT IN WEIGH IT IN WEIGH IT IN WEIGH IT IN WEIGH IT IN WEIGH IT IN WEIGH IT IN WEIGH IT IN WEIGH IT IN WEIGH IT IN WEIGH IT IN WEIGH IT IN WEIGH IT IN WEIGH IT IN WEIGH IT IN WEIGH IT IN WEIGH IT IN WEIGH IT IN WEIGH IT IN WEIGH IT IN WEIGH IT IN WEIGH IT IN

Point?