*NOW BOOKED FOR 2024* Transitmania 15 @ Santa Pod 19th to 21st July 2024 *ALL DETAILS HERE*


Loots Red custom

This forum can be used to update other members on your progress with your Transit.

Re: Loots Red custom

Postby bigjohnthomas » Wed Jul 12, 2017 5:41 pm

8) sounds like a good price
hobnobs eh? it used to be a packet of fags when i was a kid
its about time hobnobs had pictures of shrivelled up peniss and stuff on them like fag packets have too
all that sugar, where they chocolate ones too :P
User avatar
bigjohnthomas
Transit Extremist
Transit Extremist
 
Posts: 26388
Joined: Mon Sep 08, 2008 9:50 pm
Location: Uranus

Re: Loots Red custom

Postby loot » Wed Jul 12, 2017 5:48 pm

No he refused blank so i sat on the curb outside eating them and crying :lol:

It's a good price, although you'd think by now they'd be able to match the colour :roll:
Yes mr loot i have to spray the wing but then i have to spray the corner of the bumper then the front of the door then i have to lacquer the whole van :shock:
But still it'll do. 25k van there for 12k +my labour. :mrgreen:
56 350 2.2 130ps mk7 with 2 side doors 8)
65 290 2.2 125ps custom with 2 side doors 8)
07 350 170ps
Ids v86 licence + v86.04 update + xprog here
Ids map here
User avatar
loot
Site Moderator
 
Posts: 33465
Joined: Sat May 05, 2012 6:06 pm
Location: North Wales

Re: Loots Red custom

Postby neill » Sat Oct 07, 2017 3:49 pm

Hi loots . I'm trying to do the very neat modification you did on auto closing on the power mirrors . I've got them closing fine when I double lock but I'm not getting a positive pulse from wire 3 on the actuator so the mirrors will not open when unlocking.
Any chance of looking at my wiring diagram to see wher I went wrong?
You do not have the required permissions to view the files attached to this post.
neill
Transit Addict
Transit Addict
 
Posts: 43
Joined: Sun Nov 29, 2015 7:22 pm

Re: Loots Red custom

Postby bigjohnthomas » Sat Oct 07, 2017 4:04 pm

Loots busy running up a hill right now
I may be able to help

I don't remember having an earth involved
User avatar
bigjohnthomas
Transit Extremist
Transit Extremist
 
Posts: 26388
Joined: Mon Sep 08, 2008 9:50 pm
Location: Uranus

Re: Loots Red custom

Postby bigjohnthomas » Sat Oct 07, 2017 4:07 pm

This is what I have in my engineering book
You do not have the required permissions to view the files attached to this post.
User avatar
bigjohnthomas
Transit Extremist
Transit Extremist
 
Posts: 26388
Joined: Mon Sep 08, 2008 9:50 pm
Location: Uranus

Re: Loots Red custom

Postby neill » Sat Oct 07, 2017 4:19 pm

Can't really understand your notes . Wire 3 from the actuator produces a pulse to the relay upon locking but nothing when you unlock
neill
Transit Addict
Transit Addict
 
Posts: 43
Joined: Sun Nov 29, 2015 7:22 pm

Re: Loots Red custom

Postby bigjohnthomas » Sat Oct 07, 2017 4:22 pm

That make 2 of us :lol:
Are you using an automotive relay ?
I used a reed relay on mine
Loot had to put a cap in to make his big relay work
I don't think there's quite enough of a pulse for a big relay
User avatar
bigjohnthomas
Transit Extremist
Transit Extremist
 
Posts: 26388
Joined: Mon Sep 08, 2008 9:50 pm
Location: Uranus

Re: Loots Red custom

Postby bigjohnthomas » Sat Oct 07, 2017 4:30 pm

Pin 4 and 8 to relay output

You have them wired together and an extra earth
Put one one side and one the other of the switched relay output

That I believe is the problem :P
User avatar
bigjohnthomas
Transit Extremist
Transit Extremist
 
Posts: 26388
Joined: Mon Sep 08, 2008 9:50 pm
Location: Uranus

Re: Loots Red custom

Postby neill » Sat Oct 07, 2017 5:48 pm

bigjohnthomas wrote:Pin 4 and 8 to relay output

You have them wired together and an extra earth
Put one one side and one the other of the switched relay output

That I believe is the problem :P


Pin 8 is just an earth anyway , so rather than use 8 I just used the earth. The problem is on the other side of the relay , pin 3 is only sending a positive pulse on the locking motion , this correctly closes the relay and in turn closes the mirrors. The problem is that the pin 3 does nothing's nothing when the van is unlocking so the mirrors don't recieve the earth signal to open.

I'm a domestic sparky so have a reasonable understanding of these things, but the wiring config as loot explained it does not appear to be working , he wired it correctly but I don't understand his explanation
neill
Transit Addict
Transit Addict
 
Posts: 43
Joined: Sun Nov 29, 2015 7:22 pm

Re: Loots Red custom

Postby bigjohnthomas » Sat Oct 07, 2017 6:04 pm

No earth
Pin 3 runs through the relay cut the wire going to it one end one side and the other the side of the relay

There you see I remembered in the end :P
Just get rid of that earth
User avatar
bigjohnthomas
Transit Extremist
Transit Extremist
 
Posts: 26388
Joined: Mon Sep 08, 2008 9:50 pm
Location: Uranus

Re: Loots Red custom

Postby bigjohnthomas » Sat Oct 07, 2017 6:06 pm

Loots actually an algorithm so sometimes its difficult for us humans to tell what he's going on about :wink:
User avatar
bigjohnthomas
Transit Extremist
Transit Extremist
 
Posts: 26388
Joined: Mon Sep 08, 2008 9:50 pm
Location: Uranus

Re: Loots Red custom

Postby bigjohnthomas » Sat Oct 07, 2017 6:13 pm

Thats it isnt it?
Have you done it yet? :P
User avatar
bigjohnthomas
Transit Extremist
Transit Extremist
 
Posts: 26388
Joined: Mon Sep 08, 2008 9:50 pm
Location: Uranus

Re: Loots Red custom

Postby neill » Sat Oct 07, 2017 6:25 pm

bigjohnthomas wrote:No earth
Pin 3 runs through the relay cut the wire going to it one end one side and the other the side of the relay

There you see I remembered in the end :P
Just get rid of that earth

Ok thanks , I will try that tomorrow . Just couldn't understand that if you cut the wire from pin 3 , then the actuator loses it signal to lock
neill
Transit Addict
Transit Addict
 
Posts: 43
Joined: Sun Nov 29, 2015 7:22 pm

Re: Loots Red custom

Postby bambi mk 1 » Sat Oct 07, 2017 7:26 pm

Heres one Loot and BJT prepared earlier .
































http://i.dailymail.co.uk/i/pix/2014/11/ ... _Rothe.jpg
On the sixth day God created a Sprinter on the seventh he gave it away and bought a TRANSIT
User avatar
bambi mk 1
Transit Extremist
Transit Extremist
 
Posts: 8826
Joined: Sat Nov 17, 2012 10:05 pm
Location: 24 Years living next door to Alice

Re: Loots Red custom

Postby loot » Sat Oct 07, 2017 8:18 pm

Hi all I had 2 races today so been busy :-(

Also been a while since we did this so i might not understand what loot did either :oops: it's a lot easier when you know in your head :shock:

I used a small Ford relay but used a cap to store energy to the low input switch coil to delay closing enough to allow the mirrors to register a pulse and actuate.

Bjt used a tiny crap relay that was a bit slow anyway which is actually more suited to this application (damn his engineering prowess) :P

The mirrors work perfect if you open/fold double lock/fold.
They don't work if you single lock/fold closed then double lock/fold open then unlock/fold closed :?
Needs slight modification but you can quickly double press to correct them if they shut when you unlock, no big problem tbh.
Ford are away of the situation but don't care :mrgreen:

Anyway.....
Pin 3 +v pulse and ground is good and the pin 4+8 are either side no earth the mirror switch pin 4+8 link via the switch so when pressed they are bridged together, why have you got ground?

Image

:lol: :shock:

If you have a big arse relay it won't work on 1 side because the relay is stronger than the pulse is :-(
I've only looked at your wiring diagram so if I'm wrong I'll have to look at earlier posts in the topic for you :-)
56 350 2.2 130ps mk7 with 2 side doors 8)
65 290 2.2 125ps custom with 2 side doors 8)
07 350 170ps
Ids v86 licence + v86.04 update + xprog here
Ids map here
User avatar
loot
Site Moderator
 
Posts: 33465
Joined: Sat May 05, 2012 6:06 pm
Location: North Wales

PreviousNext

Return to Members Transit's - Progress Reports!



Who is online

Users browsing this forum: No registered users

This site contains affiliate links for which we may be compensated.