BROWNYS V6 wrote:Pocketrocket wrote:So not much to report lately, as above I've got the arches rolled so now don't catch, fitted my amp and sub in the boot area for a better quality sound and got the bonnet painted in the same colour (although it will need doing again as the paint underneath has still reacted with the lacquer despite having 5 layers of high build primer to seal it )
Ive fitted a 12" fan to the rad (instead of the 8") so should now be more than man enough to keep her cool
Also had a main water hose burst while driving up sheffield parkway next to the water pump, was a t##t to get to but thankfully no serious damage done
Ive also started to make the pannel thats missing from the bottom/front of the middle row seats, im incorporating some usb, 12v power sockets and a pop out cup holder for the young uns. Just needs carpeting when it's finished.
Lots of little teething/snagging problems but we're getting there
Sorry no pics just a couple I took on my way home Saturday
needs a slap with the lowering stick, looks a bit high in those pics, maybe its how u took them, but then slammed vans are no good as dailys, ask me how I know
Yeh I have got plans to drop the front a little but the rear is as low as I can realisticly go without It becoming un usable as with just the wheelchair in the back and a bit too much speed off a speed bump the rears still rub due to the width!
I lowered the rear by about 30mm by removing the bottom thick leaf from the springs, I suppose its a double edged sword as its made it a little softer on the rear but on the plus its lowered it a little, maybe custom decambered springs will be on the shopping list in a few years