Transitmania 10 @Santa Pod 18th to 20th May 2018


pinto wiring

Transit Mk1 & 2 Forum. All Transits 1965 - 1986

Moderator: Luke

pinto wiring

Postby Boffin » Fri May 25, 2018 9:38 am

Hi there, I've got a pinto out of a mk2 transit (it was A reg) it has electronic ignition, I've got the module which was by the passenger headlight and the connector to the distributor. Does anyone know how to wire it up? Or have a mk2 transit wiring diagram. Also the connector on the distributor has 3 wires, where as the other conector only has 2? It was running like that in the mk2. Thanks for any help.
Boffin
Transit Addict
Transit Addict
 
Posts: 40
Joined: Wed Aug 02, 2006 5:50 pm
Location: Bournemouth

Re: pinto wiring

Postby Chuggy » Fri May 25, 2018 10:55 pm

I have this on an old piece of paper saying pinto electronic ign wiring, its for the wires from the electronic module don't know if its any help?

green to coil
black/green to starter +
black to coil ign
brown to earth
black/red to distributor multiplug
green/yellow to distributor multiplug
Chuggy
Transit Aficionado
Transit Aficionado
 
Posts: 282
Joined: Tue Jan 02, 2018 9:27 pm
Location: Tring, Hertfordshire

Re: pinto wiring

Postby Boffin » Sat May 26, 2018 2:56 pm

Cheers Chuggy, I'll check that out. Thanks mate. Will report back when it's running :)
Boffin
Transit Addict
Transit Addict
 
Posts: 40
Joined: Wed Aug 02, 2006 5:50 pm
Location: Bournemouth


Return to Mk 1 & 2



Who is online

Users browsing this forum: No registered users