Mk1/2 Body Panels and Lamps

[bobdragon12]

I could with some front spring hangers

[dieselhead123]

I could with some front spring hangers

I will ask about the front spring hangers, but, I am sure I have seen a guide in the 'how to' section on converting Mk3 ones to fit Mk1/2's. If required I would be happy to convert these for forum members.

If any one finds it before me it might help members if a link were posted in this section, the Mk3 ones are still available.

TIM

[bobdragon12]

I could with some front spring hangers

I will ask about the front spring hangers, but, I am sure I have seen a guide in the 'how to' section on converting Mk3 ones to fit Mk1/2's. If required I would be happy to convert these for forum members.

If any one finds it before me it might help members if a link were posted in this section, the Mk3 ones are still available.

TIM

I know you can convert MK3 hangers but it would be much easier with proper MK2 fitting replacement

[dieselhead123]

The prices in the first post below will be held until existing stocks are gone;
Front door step sill, £17
Front door step, £41
Intermediate sill, SWB model, £13.50
Rear wheel arch SWB, £15


Some further parts to add to the 'available' list,

Door step sills, left and right hand available, £17 each
Intermediate side panel, SWB, left and right hand available, £19.50 each
Lower side panel, SWB, left and right hand avaialable, £19.50 each
Lower side panel, LWB, left and right hand avaialable, £20 each
Tread plate front door step, left and right hand available, £41 each
Rear wheel arches TWIN WHEEL MODELS, now available, awaiting delivery!

Some of these parts are now available from more than one supplier, this will help with 'availability issues', but please do not wait untill the day before you need a part to order it as we will not be holding large stocks of these parts.

Please contact me as required via PM, (or post on the thread), for up-to-date prices, we will always do our best for you lot.

I will share the contents of this thread with my suppliers, so keep the suggestions for additional parts coming in, this will help to 'encourage' part re-introductions.

TIM

[DodgeRover]

Great is there an exploded diagram of exactly which panels are where (like the old Melbros book) available online?

[dieselhead123]

I have an old hadrian book, some time soon I will scan the relevent page(s) and alter the part numbers to match ours.
The pics will eventually go on our website as well and the appropriate link will be posted here.
If someone has some good side-on pics of a swb and lwb Mk1/2, then I could 'highlight' the areas for each panel and re-post the pics in this thread.

in the mean time, I will gladly identify parts for members as required.

TIM

[abclee123]

Mk2 transit front doors, cross member, bonnet ,steps ,step sills ,spring hanger, headlamp panels ,inner wings ,outer wings ,cab back panel ,chassis cab back light arms , fuel tank straps thanks

[dieselhead123]

Update,

Twin wheel rear arches now available, O/S only in stock at the moment, £52.50 each.

I hope to have the N/S soon.

TIM

[RustWidow]

Swb rear lower quarter panels both sides????? I bought one on ebay and it was a lwb one waaaay too long. The bit thats behind the wheelarch and at the bottom of the rear quarter panel on a mk2 ?

[DodgeRover]

Swb rear lower quarter panels both sides????? I bought one on ebay and it was a lwb one waaaay too long. The bit thats behind the wheelarch and at the bottom of the rear quarter panel on a mk2 ?

Oh, which side do you have need a nearside (passengers) one?
Thanks

[RustWidow]

Umm both

[RustWidow]

Sorry sold it to fred as ni good for me

[DodgeRover]

Opps too slow Not desperate yet but not paying the £50 they want on ebay...

[abclee123]

Inner and outer wings, crossmember ,cab back panel front rear and side door bottoms , spring hangers , rear light arms chassis cab , headlamp panels , bonnet , steps

[abclee123]

Spring hangers ,cross member, headlamp panels,inner & outer wings , door bottoms , sills , any parts can help