Clutch

[walt1984]

Need a clutch kit for the autosleeper but struggling.
Is the clutch from other v4 or v6 engines the same?
Or does anyone have a part number for the correct clutch kit for a1977 mk1 transit with 2ltr essex v4 with 4speed box.

[walt1984]

Just a update. Been talking to me dad. Hes at home and im in Cheshire so i cant post a picture so ill try and include everything i understand.
Clutch failed when he was selecting reverse, something went with a bang and drive was engaged.
Removed the gearbox and everything was still in place. The release bearing was still attached to the folk and pressure plate fingers are intact.
But realise bearing has worn a grove into the fingers and he says it looks like they have been hot.
Ive been looking on motomobil web site and it lists borg and beck 241mm clutches for 1.7 and 2ltr v4s and 241mm clutches for 3ltr v6.
Would any 241mm clutch and pressure plate with correct bearing fit ours.?

[walt1984]

Bump.

[Ralph.9]

Are you sure yours is 241mm, all the V4 clutches i have are 220mm. The 241mm is V6, Heavy duty pinto and Di. I have complete 3 piece clutches for both but measure your original first. Give me a call if you need any more info on 07940582374. Ralph