2.9 V6 Cosworth BOA

[darrenxr3i]

Hi guys, I'm restoring my 1983 Clubmobil. Its fitted with a 2.9 V6 12v engine, but I've now bought a 24v BOA Cosworth to go in it. I think i pretty much have the wiring covered, i have all the loom, ECU etc.. but will this physically fit straight in place of the 12v? Someone said to me the 24v might foul the bulkhead? is this correct?

[bortaf]

Ive seen more than one fitted without bulkhead mods but you couldn't get a rizzla between them very tight

[MinorMatt]

And the brake servo may get in the way too

[Luke]

the only mods you'll need are to the gearbox tunnel if you fit the mt75 and as matt says the servo (if its in the correct position)
i didnt touch the bulkhead on mine