Got a mk1 Firevan with 5:8 diff,looking to change ratio to a 4:63.
Took a gamble on a c/w&p set off of eBay(just listed as mk1/2).
Arrived today(in Spain),reason took gamble was that in photo after part no(which I couldn't find to confirm),stamped on c/w is 8-37(thought might be last whole no.,divide by 8 becomes 1:4.625),so thought might be what I'm looking for.
Before I take diff apart to change just wondered if anyone would be able to confirm that I've got the right bit,what else I would need(read the ken b thread on later c/w&p)ie tools,parts etc.,or I'm wasting my time with wrong part,axle in vans silent,low miles,so was looking to change as little as poss.,know I need crush washer but was looking to reuse bearings etc.
Part no on c/w is72Vb-4210-CA. 8-37 C9.
Might even be the wrong bit,really just took gamble cos of the 8-37 stamp,thinking it would be a 4.63 c/w&p.
.