*NOW BOOKED FOR 2024* Transitmania 15 @ Santa Pod 19th to 21st July 2024 *ALL DETAILS HERE*


Engine Code Location?

Transit Mk3, 4 & 5(smiley front) Forum. All Transits 1986 - 2000

Re: Engine Code Location?

Postby AndyG » Sat Jan 04, 2014 10:22 pm

Air ingress :idea: (feed pump directly)

Broken injector tip :idea: (remove and check each injector)
Image
Ford Transit 120 TDI EPIC Automatic. 0-60 in a leisurely and smooth 12.7 seconds and 1/4 mile in 19.1 seconds. Now where's all these faster? manual Di s?
User avatar
AndyG
Site Admin
 
Posts: 27833
Joined: Sun Mar 12, 2006 1:14 am
Location: West London

Re: Engine Code Location?

Postby Lsecouriers » Sun Jan 05, 2014 1:23 pm

Dropping it into hickleys autocentre tomorrow morning for a diagnostics as becoming a nightmare.

Hopefully its not internal
User avatar
Lsecouriers
Transit Aficionado
Transit Aficionado
 
Posts: 155
Joined: Wed Oct 02, 2013 8:23 pm
Location: Bridgwater Somerset

Re: Engine Code Location?

Postby Lsecouriers » Sun Jan 05, 2014 6:06 pm

There is also by the looks of things a oil leak as when at idle its dripping pretty bad but can't see where from
User avatar
Lsecouriers
Transit Aficionado
Transit Aficionado
 
Posts: 155
Joined: Wed Oct 02, 2013 8:23 pm
Location: Bridgwater Somerset

Re: Engine Code Location?

Postby Lsecouriers » Mon Jan 06, 2014 5:55 pm

Waiting in all day for a call from hickleys to find out they are unable to diagnose it, they thought the engine in the 2001 model was a 2.4 duratorq.

so back to square one, van running in limp mode, wont go over 40/50, will not rev over 2500 rpm and also engine light on.

smoking very badly black!, diesel leak on rear housing tried a new housing still same problem could be the pressure causing this leak?

i have tried all i can now on a hunt for someone with a diagnostic machine to find the problem out

there is no pipes on my fuel lift on the side of the engine as apparently mines electronic so the lift pump has been bypassed? unsure if thats right or no just all ive been told today.
User avatar
Lsecouriers
Transit Aficionado
Transit Aficionado
 
Posts: 155
Joined: Wed Oct 02, 2013 8:23 pm
Location: Bridgwater Somerset

Re: Engine Code Location?

Postby Lsecouriers » Tue Jan 07, 2014 4:01 pm

Today i spent a hour looking over everything again to see the pins in the fuel pump had 1 completely bent, ive spent a while unbending it and getting it straight plugged it back in and hey ho running fine now and no limp mode and engine light out!

thanks all!
User avatar
Lsecouriers
Transit Aficionado
Transit Aficionado
 
Posts: 155
Joined: Wed Oct 02, 2013 8:23 pm
Location: Bridgwater Somerset

Previous

Return to Mk 3, 4 & 5 - Second Generation Transits



Who is online

Users browsing this forum: No registered users

This site contains affiliate links for which we may be compensated.