After a right nightmare with my 2.5 di turbo not starting ive just bought a whole new ex rac engine from eBay in good running order, going to have a mechanic drop it in tomorrow but before hand i want to get a service kit cambelt etc, obviously its not the exact same engine that was in mine so does anyone know if i can find the engine code out if so where too
But it won't run right without the correct lucas pump - will be on limp home mode. You need to make sure the DSA **** number on the pumps match - or put the old one on.
So they are both Lucas, and for it to work correctly you need to a) make sure the DSA**** numbers are the same, and if not swap injection pumps and injectors.
Lsecouriers wrote:Right my pump in my van is DSA1191
I think you may have your pump and outputs back to front
Simply fit your old pump to the "new" engine
Ford Transit 120 TDI EPIC Automatic. 0-60 in a leisurely and smooth 12.7 seconds and 1/4 mile in 19.1 seconds. Now where's all these faster? manual Di s?
If the "new" engine is the 100PS, (and you'd like a proper 100PS in your van) you'll need to also transfer the ECU, PATS module and the chip from the "new" engine/van's key into your existing key
Ford Transit 120 TDI EPIC Automatic. 0-60 in a leisurely and smooth 12.7 seconds and 1/4 mile in 19.1 seconds. Now where's all these faster? manual Di s?
Easy way is just swap your pump on to the new lump. Only issue I can think of is the ECU might get the hump if it's not happy with the other injectors - in which case swap them over.