H axle on my transit

[johnnee51]

Can I reset my crownwheel to pinion,clearances on the H diff, as it runs noisy when driving but quite on the over-run.
Thanks.

[vanfox]

I have a spare diff and a 4.11 crownwheel and pinion you could have built up and replace yours........

[johnnee51]

Took off the back plate and found 3mm of float on the drive side thrust bearing on the crownwheel. Reset the bearing to pinion clearance and she's quiet. Just used an angle grinder disc change spanner to reset the adjusters. the ratio was 5.11/1.