Fuel injector puller, injectors, injector accessories

[sirhenryford]

Ford Transit Motor home. Year 2000. Black smoke getting worse. Injectors should be changed at 60K now 70K. Need a Ford removal tool 23-030 or proprietary injector puller in case there is a problem removing the injectors. I read elsewhere to undo the bolt a little leaving it fitted around the injector,undo the diesel union then,simply turn the engine over and the compression within engine should pop the injector up. But I may prefer an injector tool that also makes refitting injectors easier. Where can I get one? Have enquired with a Ford Dealership already.

Also where can I get good quality cheap injectors, the dust seal washers, PTFE sealing washers, and banjo union copper washers and NOT ebay.

[transit-town]

Why you think it's injectors??, never changed them even with 250k done, have you done egr blank off..change fuel filter...di engines will always give out a bit of black smoke,if it's driving ok I'd leave alone and just service

[chaslynch]

Also where can I get good quality cheap injectors, the dust seal washers, PTFE sealing washers, and banjo union copper washers and NOT

I would be interested in this information too if anyone has it.

[gotgcoalman]

Black smoke = too much fuel and not enough air.

If you haven't tampered with the pump to up the fueling
then look at why it's not breathing freely (air filter)

I think the ptfe seals were about £3.50 each from Ford last time I needed them.
Dust seals I haven't got a clue (reused old ones)

Injectors (without buying online) Ford / diesel specialist or salvage yard.cost ????????

Never needed a special tool to remove Di injectors (plenty to get hold of) wiggle and pull
up at the same time.

Copper washers (most motor factors have a box of various sizes and will supply the correct size for not a lot of money)
or toolstation/screwfix etc.
do an assorted box.