Hi, anybody know the right size socket for the hub nut on the front for the 5 stud 14"?
Cheers
*NOW BOOKED FOR 2024* Transitmania 15 @ Santa Pod 19th to 21st July 2024 *ALL DETAILS HERE*
Socket size for front hubs for Mk5
5 posts
• Page 1 of 1
Socket size for front hubs for Mk5
by Mk5swbhighroof » Tue Sep 12, 2017 7:59 pm
-
Mk5swbhighroof - Transit Addict
- Posts: 81
- Joined: Fri Dec 23, 2016 3:26 pm
Re: Socket size for front hubs for Mk5
by MinorMatt » Tue Sep 12, 2017 8:22 pm
Front hubs are 24mm
www.facebook.com/transitionclassics
Lucas Laser 2000 & IDS
95 M Prototype/Mule DRW 100PS Highcube
93 L GL Minibus
96 P 150 TD 100PS LWB Hi-Top
Gaffa tape is like the force, it has a light side, a dark side, and it holds the universe together
Lucas Laser 2000 & IDS
95 M Prototype/Mule DRW 100PS Highcube
93 L GL Minibus
96 P 150 TD 100PS LWB Hi-Top
Gaffa tape is like the force, it has a light side, a dark side, and it holds the universe together
-
MinorMatt - Transit Extremist
- Posts: 23927
- Joined: Mon Sep 17, 2007 7:53 pm
- Location: Herefordshire/Gloucestershire/Berkshire
Re: Socket size for front hubs for Mk5
by gotgcoalman » Tue Sep 12, 2017 8:26 pm
Stub axle nut?
Mk5 15" = 24mm
My Mk3 14" = 24mm.
wheel brace fitted both
(didn't tighten up with wheel brace due to tapered bearings)
Matt beat me to it (i started typing and went for a Pee before posting)
It's an age thing
Mk5 15" = 24mm
My Mk3 14" = 24mm.
wheel brace fitted both
(didn't tighten up with wheel brace due to tapered bearings)Matt beat me to it (i started typing and went for a Pee before posting)
It's an age thing
ne m'écoute pas je suis plein de merde.
A house without a dog is like a forum without a BJT.
Too bloody quiet
A house without a dog is like a forum without a BJT.
Too bloody quiet
-
gotgcoalman - Transit Extremist
- Posts: 12337
- Joined: Thu Jan 22, 2015 6:04 pm
- Location: Aycliffe in County Durham
Re: Socket size for front hubs for Mk5
by Mk5swbhighroof » Tue Sep 12, 2017 9:01 pm
Thanks guys, much appreciated. A trip to Halfrouds in the morning it is then.
-
Mk5swbhighroof - Transit Addict
- Posts: 81
- Joined: Fri Dec 23, 2016 3:26 pm
Re: Socket size for front hubs for Mk5
by Jim Archer » Wed Sep 13, 2017 9:49 am
Should only be just about finger tight if adjusted correctly.
Jim
Jim
Mk7 140 Jumbo - Vantunered.
289,000 and counting.
289,000 and counting.
- Jim Archer
- Transit Fanatic
- Posts: 3434
- Joined: Sat Sep 29, 2007 6:45 pm
- Location: Southampton
5 posts
• Page 1 of 1
Return to Mk 3, 4 & 5 - Second Generation Transits
Who is online
Users browsing this forum: Google [Bot]