cherniy_chack wrote:Hi,eastkent
I thought about the possible reasons for a bad cold start of your engine without a KSB and an excellent start when turning the gear lever with your hands.
I think the reason is that when you replaced the cam belt, the initial injection angle was incorrectly set.
A late injection was installed.
If the injection timing is set correctly, the motor at a temperature of -5 ° C starts up after 2 ... 5 seconds of the scrolling by the starter.
I recommend that you remove the timing belt protection and install the injection earlier.
I will certainly look at this in the coming weeks. I intend to change the timing belt in the near future so I'll make sure everything is timed properly.
It starts and runs perfectly above +5C.