turbo sump fitting size

[davetheshrew]

I managed to get an original oil outlet pipe for my turbo but ant seem to figure out what size fitting I need to add to the sump, any tips would be great, thanks.

[vanfox]

This has been covered in the past, use the search feature, top right.

[F111ORY]

Its m20 take your flexible hose to a hydraulic supplier and they will sell you a fitting that screws into it, assemble the turbo on the engine with the fitting in the return pipe to position it correctly ( you may want to cut off unwanted threads) on the sump, tack weld it and then remove the flexible pipe before completing the welding, then drill through.

[cherniy_chack]

The socket (fitting) on the pallet is threaded M20x1.5.
Tomorrow I will clarify.
The fitting is installed on the sump wall by the drain hose, welded, then the hose is removed and the fitting is finally welded.
Then a hole is drilled in the wall of the pallet.

[cherniy_chack]

M20x1.5