Are all 6 stud axle diffs front loading?

[NeilsTransit]

G'day to you
It seems that there are 2 types of diffs on the VG model (Mk5). One unloads from the drive shaft end and the other loads from the back of the axle, I was wondering if the wheel studs indicate what type the diff is?

[wojciech]

G'day to you
It seems that there are 2 types of diffs on the VG model (Mk5). One unloads from the drive shaft end and the other loads from the back of the axle, I was wondering if the wheel studs indicate what type the diff is?

For Mk5 are two types diffs "Salisbury" with six studs.
One for single wheel, type 51, resambles light "Timken" (because of a double-race ball-bearing). Diff type 51 replaced in 1991 type 51A with two taper-roller bearings. Type 51 has load half-shaft.
Second diff it is "Salisbury" type 53 for double wheels, with two taper-roller bearings. It has unload half-shaft.

https://www.catcar.info/ford/?lang=en&l ... ArMA%3D%3D
https://www.catcar.info/ford/?lang=en&l ... ArMA%3D%3D
https://www.catcar.info/ford/?lang=en&l ... YrMA%3D%3D

[NeilsTransit]

Thanks for your reply Wojciech, I asked the wrong question, I have uploaded the correct question just now, sorry about that.