Landrover wheels.... again!

[Luke]

black one looks mint

[darkbluevanman]

Would be fine if there were some arches you could stick on....

[darkbluevanman]

black one looks mint

Yes, that's the look... you can just see the extra bit off offset on those black rims...

[darkbluevanman]

Made that drilling jig too Luke.... used std Landy bolts (pressed in) and nuts:

[Luke]

spot on

[crayon]

All this talk of redrilling the wheels and not having the extra holes would it not be possable to redrill the 2 front hubs and rear drums to make them 5 x 165 landrover pcd after all they are only studs which the transit ones can be knocked out and the new holes fitted with new 16mm studs to match the landy wella`s?????????????/

[vanfox]

I take it you will all tell your insurance company about these non standard modifications...........?

It's not as if you can hide different wheels under the bonnet!

[crayon]

I take it you will all tell your insurance company about these non standard modifications...........?

It's not as if you can hide different wheels under the bonnet!

No but you can always keep your old wheels in the shed lol

[mikezed]

dos anybody have a drawing of the jig so i can get one made,

[mikezed]

or dos anybody want to sell me theres, cheap.

[Luke]

where abouts are you

[reaper]

I would be interested in one as well the jig that is

[mikezed]

im in north wales, iv just got myself some 8 spoke land rover wheels 7x15, and nead to redrill, any help would be good,

[G40GES]

good point, but we're fabbers not engineers, rings and welding are free, drilling the wheels isn't .... are those landy wheels in the piccy?? the pcd looks quite outward on the flange (if you know what I mean?)

ive got a jig to redrill the wheels - bolts up to the landy pcd and you just drill through 3mm holes which are 160pcd
i'd do em you but you could almost make a jig on the lazer - 5x165 holes 12mm and 5x160 3mm's then bolt it up with some old studs drill through the 3 mm with a pistol drill then go through a set of drills untill you get to the 13mm then all you need is a 60deg taper bit to put the nut seat on - piece of piss really

then weld the old holes up

LASERS!!! mr handy man

[barryroxy187]

Please please please can somebody redrill my wheels I can take em anywhere to get done and cash waiting please can