4 loudspeakers on Mk7 Motorhome coding via OBD

[slk-A4]

Could anyone who is familiar with IDS please post how this is done in IDS?
(I mean step by step).
Thanx!

Enter module programming
Enter configurable parameters
Download configuration file
Alter no of speakers to 4
Upload configuration file
Job done

Thanx mate, my dealer, as so often, did not know or pretended he didn´t know. The mechanic I spoke to, said It would be an hour or so, to program of to find out how to, because he didn´t know. He had never done it.

I reckon this can be done within three minutes or so. Is that right? Do you think, it could be done with this interface?
http://www.ebay.co.uk/itm/FORD-VEHICLE- ... 2a2cbcaba6

I would only need it fo my 2007 Mk 7 2.2. I think that cheaper than asking the dealer to program it.

[belly]

Sorry no help to your post But your Citroen's are beautiful

[slk-A4]

Sorry no help to your post But your Citroen's are beautiful

Thanx,
CU
Peter

[ake]

Could anyone who is familiar with IDS please post how this is done in IDS?
(I mean step by step).
Thanx!

Enter module programming
Enter configurable parameters
Download configuration file
Alter no of speakers to 4
Upload configuration file
Job done

Thanx mate, my dealer, as so often, did not know or pretended he didn´t know. The mechanic I spoke to, said It would be an hour or so, to program of to find out how to, because he didn´t know. He had never done it.

I reckon this can be done within three minutes or so. Is that right? Do you think, it could be done with this interface?
http://www.ebay.co.uk/itm/FORD-VEHICLE- ... 2a2cbcaba6

I would only need it fo my 2007 Mk 7 2.2. I think that cheaper than asking the dealer to program it.

Should probably take around 20 minutes tops.

[wexican]

Just to note, the MK7 factory minibuses have this feature working as standard in my experience.

[belly]

Iirc anything with another row of seats from the factory has it enabled Campers are just a tipper with a shed on the back (the member I'm taking the pee out of will get that)

[ake]

Iirc anything with another row of seats from the factory has it enabled Campers are just a tipper with a shed on the back (the member I'm taking the pee out of will get that)

Mine is actually a cab van floor with a shed on the back, so you can't be referring to me!

Did you not get Coconut to enable the fader for your speakers on the Chav chariot?

[belly]

Iirc anything with another row of seats from the factory has it enabled Campers are just a tipper with a shed on the back (the member I'm taking the pee out of will get that)

Mine is actually a cab van floor with a shed on the back, so you can't be referring to me!

Did you not get Coconut to enable the fader for your speakers on the Chav chariot?

Doh messed that one up eh No I didn't in the end as we were gassing for so long he had to work on some proper customers vans Plus he'd done another job for me that wasn't on his paperwork

[slk-A4]

Could anyone who is familiar with IDS please post how this is done in IDS?
(I mean step by step).
Thanx!

Enter module programming
Enter configurable parameters
Download configuration file
Alter no of speakers to 4
Upload configuration file
Job done

::::::::::::::::::

Should probably take around 20 minutes tops.

Just came back from the dealer here in the Netherlands: The mechanic that did the job, exactly knew what he did, it took him exactly 6 minutes from driving the van into the garage to programming the BCM and unplugging the IDS interface.
I had to pay € 25,91 plus VAT: € 31,35, that is about 27 GBP, for a six minutes job!

For that reason I would rather buy some IDS clone. Any tips?