Massive help with transit needed please

[Teasdalemk6]

Cool ill use laptop then

[knobby1]

Cool ill use laptop then

Yep...Ned's quite correct...only the full Windoze version will do "all" the Forscan functions....the others are good for most people though and if you're stuck on side of road somewhere and need to diagnose something with no access to a lappy. I prefer the USB cable setup but some like the Bluetooth or WiFi setup....either should work fine. I find the USB tends to have less "drop-outs" though.

Lord Knobrot

[Teasdalemk6]

So ordered me self that elm327 £15 is there a guide how to do it or is it simple once connected up

[ned]

Its easy, even I can do it, download forscan - plug elm327 into obd port - press the connect icon on the screen - and away you go, much easier than f-super and formidable. N

[Teasdalemk6]

Cheers lads on another note a bought a priming bulb to prime the fuel lines ... which lines do i connect it to

[ned]

Fuel line from the filter to the pump, fit the bulb at the filter hope that makes sense. N

[ned]

Fuel in line not return its the one at the front. N

[Teasdalemk6]

Do i temp fit it or cut fuel wires and have it perm fitted in the fueil in line

And am i right thinking ita the line on the left at the front which is the line in to the pump

[ned]

No need to cut the fuel lines, did you get the bulb with the fittings on, if so unclip the fuel supply from the left of the filter and clip the bulb pump on to the filter and into the fuel line. N

[Teasdalemk6]

No mate halfords generic big one

[ned]

So not like this then

WP_20170826_10_31_32_Pro.jpg

I suppose if you make a clean cut and seal it tightly with jubilee clips then you can just leave it in place, just make sure you fit it the correct way as they have a 1 way valve in them.

Yes fuel supply is the one at the front. N

[Teasdalemk6]

http://www.halfords.com/workshop-tools/ ... CEQAvD_BwE

[Teasdalemk6]

So not like this then

WP_20170826_10_31_32_Pro.jpg

I suppose if you make a clean cut and seal it tightly with jubilee clips then you can just leave it in place, just make sure you fit it the correct way as they have a 1 way valve in them.

Nope

Yes fuel supply is the one at the front. N

[Teasdalemk6]

So got elm cable and forscan but it says turn key to ignition on

[ned]

Mines WiFi so am not to sure with the wired one but do you have to assign the usb port to the elm, I know you do with f-super.
For coding the pump in setting on forscan I think it comes under incode but I could be wrong. N