What did you do to your mk6/7 today?

[ned]

What you trying to say guvnor,

Custom driver

C__Data_Users_DefApps_AppData_INTERNETEXPLORER_Temp_Saved Images_victorian-vest-1.jpg

Mk6/7 driver

C__Data_Users_DefApps_AppData_INTERNETEXPLORER_Temp_Saved Images_old tramp.jpg

N

[dirtydog]

Where did you get that picture of me?

[birdie]

4E516527-BBAB-4C2F-8D14-67626E87C0EE.jpeg

2 new batteries in my bus today

[andz327]

[quote="withers1"]Did u need to have the ecu programed for the egr deleation plate or not m8

not with a 125 TDCI.

You need to delete the whole van if its a mk 6 tdci withers van is a mk 7 so it needs the ecu programmed

Mk6 tdci can delete themselves especially when you burn off a wee 85 at the lights only to find your brakes are sh*t N[/quote]And the egr needs to be working properly before delete gets done

[bambi mk 1]

4E516527-BBAB-4C2F-8D14-67626E87C0EE.jpeg

2 new batteries in my bus today

You need to put a battery in your hoover too

[Chillitt]

Booked the van in for it's MOT, on the way back engine light came on, looking at the date on the fuel filter, I think I know what the problem is.. Also think the airfilter might be passed its best.

[andz327]

Booked the van in for it's MOT, on the way back engine light came on, looking at the date on the fuel filter, I think I know what the problem is.. Also think the airfilter might be passed its best.

How the fook was that drivable..... Better give the turbo a check as well

[Chillitt]

Booked the van in for it's MOT, on the way back engine light came on, looking at the date on the fuel filter, I think I know what the problem is.. Also think the airfilter might be passed its best.

How the fook was that drivable..... Better give the turbo a check as well

It went well! Mind, I'm used to a DI smiley...

[Airthies]

New headlights Andz, is it time for another oil cooler to sh*t the bed You'll be blinding everyone now with your bright lights N

Yeah new peepers but couldn't find ma cone cutter to enlarge side light holes for led sides and fitted new crank pulley to go with new tensioner, belt and idlers x2 from other day .....been an expensive week

If yr needing the holes opened I've a step drill in the van.
Geez a shout and will sort you out and cheer up yr week for you.
(Check yr PM's)

[andz327]

New headlights Andz, is it time for another oil cooler to sh*t the bed You'll be blinding everyone now with your bright lights N

Yeah new peepers but couldn't find ma cone cutter to enlarge side light holes for led sides and fitted new crank pulley to go with new tensioner, belt and idlers x2 from other day .....been an expensive week

If yr needing the holes opened I've a step drill in the van.
Geez a shout and will sort you out and cheer up yr week for you.
(Check yr PM's)

Nice one......
These arrived today so weather permitting(hahahaha) I'll be busy sunday

[andz327]

Seen a beast today and fell in love,silver twin wheel jumbo 5 pot 200bhp beastie mk7.....I'm thinking lottery win required to get one of these

[loot]

Seen a beast today and fell in love,silver twin wheel jumbo 5 pot 200bhp beastie mk7.....I'm thinking lottery win required to get one of these

There was a 4.x 200ps ambulance in eBay recently, went for a couple of thousand, still had all three cupboards in and where the gurney went, ooh i didn't half fancy it

Just think of the money you could make mobile masochism

Be housewives queueing up i tell ya!

[tony&kasia]

My van runs sweet as a nut again
They put in another set of injectors Well he said he made up another set
Now i have to replace the inside door handle on the sliding door
Apparently she could not open it because it snapped
Good job i kept the old door with all the bits on
Can i fix it from the inside or do i slide off the door We will see

[loot]

My van runs sweet as a nut again
They put in another set of injectors Well he said he made up another set
Now i have to replace the inside door handle on the sliding door
Apparently she could not open it because it snapped
Good job i kept the old door with all the bits on
Can i fix it from the inside or do i slide off the door We will see

I hate garages

Glad it is sorted tho

Door handle should be accessible with the door on, i did the outer handle on the bosses van.

[paul2012]

I will just see how the spare of the moment goes if i get white smoke. At the mo bloody fuming as this is 3rd time back to a billy the kid

Can you not just pop back to paul2012? Probably be sorted in 10 mins. N

I'd already diagnosed worn injectors. Hence why it originally went in for a set.

Bearing in mind. Tony's is a mk7 van that has a Mondeo mk3 2.0 TDCI engine fitted.
Me myself, completed conversion more than a year ago & has passed 2 consecutive MOT's since then - See thread here viewtopic.php?f=27&t=182739

I had advised Tony due to price he paid to take it back to them. To be blunt they screwed it up & should fix it.

As for that garage.....