What did you do to your mk6/7 today?

[ned]

bloody thing has decided to leak coolant again looks like I'll be firing up the welder tomorrow, bloody ford. N

[Brains_transit]

Put some rear arches on a van and didn't need the below part so if anyone needs it you can have it. Passenger rear arch behind the bumper

[Shaun306]

Got a trafic

Wish I’d gone that route......my custom is nowt but bad luck
So guess you won’t be on here no more then.....

[Punto443]

Course I will

The trafic forum is boring

[Airthies]

Course I will

The trafic forum is boring

Was on the Renault forum for a while, since we had a Laguna before these vans, man they were a boring bunch and next to no help either!

Sent from my anu5 using crapatalk

[ned]

Course I will

The trafic forum is boring

Was on the Renault forum for a while, since we had a Laguna before these vans, man they were a boring bunch and next to no help either!

Sent from my anu5 using crapatalk

I concur, just been on there to see why the scenic keeps spitting out it's no1 injectors back pipe bloody Siemens injectors. No bloody posts about it N

[khaito]

Dumped it in a garage to get a hole in the OSR inside wheel arch welded because I'm an utter noob at welding and I chickened out of doing it myself.

[loot]

Dumped it in a garage to get a hole in the OSR inside wheel arch welded because I'm an utter noob at welding and I chickened out of doing it myself.

What could go wrong? He who dares wins

[khaito]

Dumped it in a garage to get a hole in the OSR inside wheel arch welded because I'm an utter noob at welding and I chickened out of doing it myself.

What could go wrong? He who dares wins

Aside from exactly that? Nothing!

[the dutch guy]

Aux belt tensioner bolt came loose AGAIN.

Right now waiting for services to tighten the bolt (not broken) up and put the belt back on. I can drive without one but its too hot and i am tired paying for a service i never use.

Why is this bolt such a c***? Previous time it was too tight and broke, now it came off because its too loose.

[dirtydog]

Fitted new side door roller and track this afternoon

[loot]

Fitted new side door roller and track this afternoon

Is it rolling dead nice ams smooth? I get a bit of a frill from it

[dirtydog]

Fitted new side door roller and track this afternoon

Is it rolling dead nice ams smooth? I get a bit of a frill from it

It certainly is, I made sure the roller I got had the rubber wheel so it's nice and quiet as well

3CC367C8-D486-4654-B7E2-5CFA1D20BEA3.jpeg

[Brains_transit]

Had a weep from a front brake pipe when the brakes were pressed hard so renewed the flexy and a small bit brake pipe and went to bleed the brakes only to snap a bleeder on the rear cylinder so replaced the cylinder so back to the bleeding brakes

[loot]

Had a weep from a front brake pipe when the brakes were pressed hard so renewed the flexy and a small bit brake pipe and went to bleed the brakes only to snap a bleeder on the rear cylinder so replaced the cylinder so back to the bleeding brakes

Did you use an open ended spanner?