New clutch/slave fitted but unable to bleed system.
Clutch pedal down fluid out of bleed nipple on slave.
Clutch will not return and there is no pressure.
Any help pse
Eddy
*NOW BOOKED FOR 2024* Transitmania 15 @ Santa Pod 19th to 21st July 2024 *ALL DETAILS HERE*
Clutch bleeding
3 posts
• Page 1 of 1
Clutch bleeding
by EDDY99 » Thu Oct 23, 2014 5:34 pm
MK 7 Transit 2006 (56) 2.4L Duratorq-TDCi (100PS) Series 1.7-350L
- EDDY99
- Transit Aficionado
- Posts: 233
- Joined: Sat Sep 27, 2014 9:21 am
- Location: Essex
Re: Clutch bleeding
by karl » Thu Oct 23, 2014 5:59 pm
get an oil can a some tubing and back bleed the system you have an air lock in the slave its self and not easy to get it out or vacum pull it using one of these
i use one of these
http://www.ebay.co.uk/itm/SEALEY-VS020- ... 2a19c037b2
i use one of these
http://www.ebay.co.uk/itm/SEALEY-VS020- ... 2a19c037b2
-
karl - Tranny Lover!!!
- Posts: 8964
- Joined: Tue Jan 08, 2013 9:03 pm
- Location: manchester
Re: Clutch bleeding
by EDDY99 » Thu Oct 23, 2014 8:10 pm
Normal small oil can with clutch fluid in
Hose to bleed nipple of clutch slave cylinder
Pump clutch fluid back till air goes back to master cylinder
Is this correct ??
Hose to bleed nipple of clutch slave cylinder
Pump clutch fluid back till air goes back to master cylinder
Is this correct ??
MK 7 Transit 2006 (56) 2.4L Duratorq-TDCi (100PS) Series 1.7-350L
- EDDY99
- Transit Aficionado
- Posts: 233
- Joined: Sat Sep 27, 2014 9:21 am
- Location: Essex
3 posts
• Page 1 of 1
Return to Mk6 & Mk7 - Third Generation Transits
Who is online
Users browsing this forum: No registered users