Clutch losing pressure

[Armstrong paving]

Help my vans just started losing pressure on the clutch pedal, it's not all the time it's just when stopped at junctions etc I can feel the pedal going soft and the van trying to drag away and I'm unable to get the van out of gear to stop it without cutting the engine, fluid level is fine ????

[dodgy01]

prob the clutch slave cylinder mate
its a gearbox out job

[Frag]

More likely the Master cylinder,and a hell of a lot easier

Unless your losing brake fluid or its running out of bellhousing.....

More van details required,Front or RWD,5 or 6 speed....Age etc.

[satumashirt611]

i had same issue,was the cylinder at the pedal..sometimes no preassure and have to pump it loads to build it up.couldnt get it out of gear other times without massive pumping or couldn't get it into gear without same

[Armstrong paving]

More likely the Master cylinder,and a hell of a lot easier

Unless your losing brake fluid or its running out of bellhousing.....

More van details required,Front or RWD,5 or 6 speed....Age etc.

It's 55 plate fwd 5 speed, no loss of fluid what so ever

[Frag]

Fairly common fault,you need a new clutch master cylinder fitting...

[Armstrong paving]

Thanks for the input guys new master cylinder ordered hope it solves it cheers

[scareyb]

same problem here been told how to bleed tried a couple of times no sign of leakage underneath

my original post
viewtopic.php?f=5&t=152231