*NOW BOOKED FOR 2024* Transitmania 15 @ Santa Pod 19th to 21st July 2024 *ALL DETAILS HERE*


crank position sensor 2.3 L petrol mk6

Transit Mk6 & Mk7 Forum. All Transits 2000 - 2013

crank position sensor 2.3 L petrol mk6

Postby rikki19 » Sun Nov 23, 2014 11:43 am

Hi guys ,
Can anyone confirm the location of the cps . I believe it's the one on the side of the bellhousing , driver's side just above starter motor and behind the oil filter ???? . Should I expect it to be coated in oil or dry ? ......... cheers
Mk 6 2.3L petrol 2001 MWB T330 275K
Mitsubishi WA Express 2.4L
Proton Satria GTI 2003
rikki19
Transit Aficionado
Transit Aficionado
 
Posts: 248
Joined: Wed May 01, 2013 12:17 pm
Location: Brisbane , Australia

Re: crank position sensor 2.3 L petrol mk6

Postby madmart132 » Tue Nov 25, 2014 10:55 pm

Thats the one Rikki , I have not changed mine on my MK6 but had to on my smiley face they are in the same place I believe .
Expect bruised knuckles as it is a real pain to get at , seemed to be protected from oil and dirt by the oil filter on mine so cannot really comment on cleanliness !!
madmart132
Transit Aficionado
Transit Aficionado
 
Posts: 336
Joined: Sat Nov 07, 2009 3:58 pm

Re: crank position sensor 2.3 L petrol mk6

Postby rikki19 » Tue Nov 25, 2014 11:08 pm

Thanks for that ...... I was thinking more of the actual sensor bit inside . I took out a single 8 mm bolt , undid the wires but the sensor would only turn slightly and not come out . I assume they have an o-ring same as the cam sensor . Didn't want to force it incase I had the wrong one and it broke ... lol
Mk 6 2.3L petrol 2001 MWB T330 275K
Mitsubishi WA Express 2.4L
Proton Satria GTI 2003
rikki19
Transit Aficionado
Transit Aficionado
 
Posts: 248
Joined: Wed May 01, 2013 12:17 pm
Location: Brisbane , Australia


Return to Mk6 & Mk7 - Third Generation Transits



Who is online

Users browsing this forum: No registered users

This site contains affiliate links for which we may be compensated.