Wheel bearing

[Herts]

Does anyone know the correct wheel bearing for a MK7 2.4 RWD 2007

I have found 2 part numbers, see below:

http://www.ebay.co.uk/itm/Genuine-Ford- ... SwJq1ZZfk9

or

http://www.ebay.co.uk/itm/Genuine-Ford- ... 3f6ad9404d

Many thanks for any input.

Andy

[bigjohnthomas]

bloody bloody that second ones a tad expensive
must be thefirst one

its the max front axle load
ones 1750kg
the second is 1850kg

only50kg in it per side
whats that a bag of chips?
get the cheapo one

[Herts]

I knew you would be the first one to reply, at least it was quite sensible.


Andy

[knobby1]

The heavier one is slightly larger in diameter (ID) and the hub is likewise larger....Usually for the Jumbo's and dual rear wheel jobbies.

Lord Knobrot

[Herts]

So it looks like the gimp man was right then, I will give Mr Fraud a call in the morning and let you know.

Andy

[4door4]

It's a shame they don't provide detailed dimensions for the bearings more often. I have a spare one sitting here for a mk6 and putting cheap digital calipers on it I get about 44.85mm on the ID. I assume the hub shaft is going to be about 45.0mm OD. If I can find a dual wheel or jumbo hub lying around I'll try and get a measurement just out of interest. Confirming dimensions before handing over the money for parts has saved me a lot of time & hassle in the past.

[bigjohnthomas]

i think youll find i am never wrong

[blue estate]

i think youll find i am never wrong

Don't let dragon knickers hear you say that ! Or you'll be locked in the dungeon with DBVM

[Herts]

Well, guess what?

Old BJT is correct, the bearing ending 907 is the correct one for my van and cost £121 from Ford main dealer.

Also well done to our foreign friend from down under, he is also correct.

Now I have to get the b*stard fitted and no I won't be bash bash that will do.

Andy

[bigjohnthomas]

this one then
http://www.ebay.co.uk/itm/Genuine-Ford- ... Sw5ZBWOO6x

lolzzz take it back

[Herts]

I contacted them and was told delivery was by Friday, I need it for tomorrow.

Anyway, it comes off my tax bill.

Andy

[bigjohnthomas]

nice mark up on it for them
id be off down the pub ifr i made 60 quid in a day

[knobby1]

Well, guess what? Also well done to our foreign friend from down under, he is also correct. Andy

Foreign?...me?? I'll have you know I was born here in "down-under land"..!

Lord Knobrot

[mjsroofing]

The second one, (908) looks the same as my fwd 09 plate transit, front wheel bearing, also was same for my 02 plate front wheel drive, front wheel bearing.

[Herts]

UPDATE:

The love machine is back on the road after 3.5 hrs removing the old bearing, it didn't want to come out.

Happy days!

Andy