by v8dave » Sat Aug 19, 2017 2:42 pm
It might be possible but you would still need to remove the fuel pipes from the rail to the injectors, plus you'd be working upside down and by feel only to change the seal.
I know the genuine ford injector seals are expensive and you'll need injector bolts but taking the cover off is going to be quicker.
mk7 08reg 2.4 T350 LWB MHR RWD
mk6 X reg 2.4 T350 LWB MHR RWD - scrapped
mk4 J reg 2.5 L300 LWB MHR RWD - sold on
Notice a trend there ? not too big and not too small