Misfire when making a left hand turn

[davireland]

I have recently purchased an 07 2.4 100 ps pickup, ran fine for a couple of days, noticed a very infrequent misfire, which seemed to pass but now few weeks on has returned again, and is only really noticeable when making a left hand turn, even on a slight left hand bend the vehicle misfires, and if at low revs when turning left into a junction it will cut out all together, have had a diagnostic check done by my local mechanic but no faults showing up. seems to be more inclined to do it when fuel tank is quite full, any ideas ?

[Thequeenscheese]

Something trapping the fuel line as the weight shifts?, fuel pump moving around getting a bad connection etc?

[ake]

Check all engine bay wiring for damage/chafing

[davireland]

Ok guys thanks for your help , have found the problem , it was indeed the loom , a previous owner must have had a problem or a need to access the wiring , the protective casing had been slit open and taped back together and it was rubbing on the side of the junction box, as soon as I moved the loom the problem disappeared , may have to look at replacing that front loom, thanks again.

[Thequeenscheese]

Glad it's a simple cheap fix, I'm never that lucky..

[lpstransit]

Ok guys thanks for your help , have found the problem , it was indeed the loom , a previous owner must have had a problem or a need to access the wiring , the protective casing had been slit open and taped back together and it was rubbing on the side of the junction box, as soon as I moved the loom the problem disappeared , may have to look at replacing that front loom, thanks again.

Hi I’m having the same problem with my van would you mind let me know where your wiring loom was damaged
Regards Paul