Rear axle ratio different on different models?

[KevofCov]

Hi
current van 2010 2.4 RWD 115hp.
Im looking at buying a 2011 2.4 RWD 98hp. Will I definately get a different rear axle ratio? I assume it would be a lower ratio therefore higher reving.
cheers

[bigjohnthomas]

Probably have a shitty 5.11 in it
Just check on etis before you look
Anything beginning with 5 is only any use to a dirty builder type

[ake]

Depends if the new van is 5 or 6 speed

[KevofCov]

Thanks gents - I appriciate your time as the subject is a bit anal.
(Its stops being anal when you have to live for years with a low ratio axle)

[karl]

Hi
current van 2010 2.4 RWD 115hp.
Im looking at buying a 2011 2.4 RWD 98hp. Will I definately get a different rear axle ratio? I assume it would be a lower ratio therefore higher reving.
cheers

it depends if its from a company or personal person who ordered the van

[t2myd]

Hi
current van 2010 2.4 RWD 115hp.
Im looking at buying a 2011 2.4 RWD 98hp. Will I definately get a different rear axle ratio? I assume it would be a lower ratio therefore higher reving.
cheers

it depends if its from a company or personal person who ordered the van

Be a shitty 5.11 on a 100 euro 4 van

[KevofCov]

Never looked for it but I believe there is a label somewhere on the axle.

[bigjohnthomas]

Just put the bloody reg number into etis
It tells you in the first few lines what the ratio is

[t2myd]

Just put the bloody reg number into etis
It tells you in the first few lines what the ratio is

Thatif it's the original axel on it

[bigjohnthomas]

Yes that's assuming the bodgers haven't been at it