Annoying problem with MK6 C/L!

[Finn_Timo]

So, the problem is that using remote or drivers door lock I can lock ONLY front doors while SLD and back doors go into lock but they bounce right open?! I have read numerous topics concerning this frustrating problem, but I can't find straight answer to my problem. All locks work, as they go lock and open, also interior lights work as they should (open-closes when C/L is used, even load area light ).

I have tried taking off SLD outer handles cable off, no difference... Also different C/L module is tried, same song goes by!

This van has MK7 conversion done, I have used MK7 doors and looms. Both door looms have pins 12&15 connected, when only drivers door loom was done all locks went to lock and bounced up?! After altering N/S loom, front doors stay locked while others still bounce up?

I measured back door loom and all cables are OK. BUT, while trying loom from another MK6 in the yard interior lights wont shut even all doors shut? Vans own back door looms number is 1C1T-018C394, while that another is YC1T-018C394. When in place in that another MK6, all works like is mentioned

This starts really pi$$ me off, I can't leave my van in public places for too long like this...

Any help is appreciated, thanks in advance!

-Timo-


P.S. If anyone has MK7 RWD 5 speed gearbox back end (linkage) for sale, send PM! All others parts for interior are now in stock, but this one I can't find even how hard I look. Or is it just me...