Transit heater setting

[squirrel93]

I recently changed my mk6 dash to a mk7 , I have replace the compete dash using mk7 heater ducts , all the ducts are in place and seated correctly , I have changed the cable on the heater control for a longer one but this is on the temp side , my heater blows air threw forward facing vents and also on the feet but is very poor on the window now , literally nothing coming out the top of the dash tho sounds like loud like is pushing the air up but something is blocking it ? Is there flaps inside the dash that may be stuck shut ? , as far as I can see all the wiring and ducts are fine , what has changed ?


Sent from my iPhone using Tapatalk

[motorman116]

Welcome to the world of the Mk7 heaters

[squirrel93]

Welcome to the world of the Mk7 heaters

Our other mk7s work fine .. the hot air comes from the box then up the small S shapes duct where it connect to the last section on the dash then seems to stop? Almost like there’s a vent inside that’s shut?


Sent from my iPhone using Tapatalk

[squirrel93]

Quick update , iv been out and checked the duct again the driver side was slight off , they are clearing the window now but again still not as powerful as the other settings , for now it will do


Sent from my iPhone using Tapatalk

[v8dave]

Quick update , iv been out and checked the duct again the driver side was slight off , they are clearing the window now but again still not as powerful as the other settings , for now it will do

That's why heated screen are so popular on mk7s