by loot » Sat Feb 24, 2018 8:01 pm
You have 2 positives and 2 negatives in the Windscreen pillars, remove the plastic bits to reveal the wires.
Use a multimeter on both sides top and bottom and with the screen turned on you should see 12v. If there is 12v top and bottom left and top and bottom right then the screen is fubar.
If there is no 12v left or right side (screen side working obviously has power so the not working side has no 12v then you need to check the bottom cable to ground for continuity and or the top and a chassis ground elsewhere for 12v.)
The fuses are at the back of the drivers seat you need to remove the black plastic cover to reveal the seat fusebox. Fuses 4 and 6 are for left and right screen @40A
56 350 2.2 130ps mk7 with 2 side doors
65 290 2.2 125ps custom with 2 side doors
07 350 170ps
Ids v86 licence + v86.04 update + xprog
hereIds map
here